Subcategories
Propellers for all Polaris jet skis: PA-CD-12/18, PA-CD-13/19, PA-CD-15/21, PB-SC-X (see the correspondence table at the bottom of the page)
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Polaris Genesis jet ski ref. HT95 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
IDIARTEC start and stop switch Ref: CSS
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
Handlebar with NEKEN reinforcement bar for saddle jet ref. 060129XX
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
PROK air filter for 1 jet ski carburetor ref. 006-585
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
Water protection sock for K&N air filter (see table below)
Lateral foot block 33x5cm ref. TS43
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
Stainless steel towing ring for saddle jet ski
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX
WSM air filter adapter for Mikuni 38/40 mm carburetor Ref: 006-664
SOLAS propeller remover for Honda, Polaris & Tigershark ref. WR001 and WR006
Pre-filter for high performance RY1301-1 air filter from RIVA Racing Reference: RY1301PF-B
COVER FOR TAU CETI TORNADO AIR FILTER Ref: PF-TCP-25
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm without oil injection Ref: 006-660
WSM or SBT adapter (depending on availability) for air filter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
Tau ceti air filter cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm with oil injection Ref: 006-660-01
WSM or SBT adapter (depending on arrival) for air filter for Mikuni 57 mm carburettor for XLT, GP & GPR Ref: 006-667
WSM or SBT adapter (depending on arrival) for air filter for 44 mm Mikuni carburettor with oil injection Ref: 006-661-01
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
COVER FOR AIR FILTER TAU CETI ROUND EP:1,5'' Ref: PF-TCP-01
Instant disassembly connection for garden hose Ref: SC-2900
WSM or SBT adaptable propeller remover (Depending on availability) for original Yamaha, Kawasaki, Seadoo, Polaris, Tigershark jet ski propellers
Reinforced handlebar foam for 24.5cm NEKEN tube ref. 0601288X Color : Fluorescent yellow White Neon Orange Black Flashy green
NEKEN square reinforced handlebar foam ref. 0601XXX Color : Fluorescent yellow White Neon Orange Black Flashy green Blue Red Black and Orange Black and Yellow Yellow and Black Green and Black Light blue Fluorescent Orange and White Light Blue and White Red and white Carbon Black / Light Blue Carbon black / Green Carbon Black / Orange Carbon Black / Red...
H2O water protection sock for PROK air filter ref. 006-580
Water evacuation drain kit for 2-stroke Seadoo, Polaris and Honda jet-skis Ref: A2265
SOLAS propeller tip for Honda, Polaris & Tigershark Reference: SLA010, SL012 and SL009 Reference no longer manufactured: SL006
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tube or 1L jar References: BOKM502930 or BOKM502932