No products
X2
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
X2
Subcategories
-
329,95€ Delivery within 2 to 10 daysIdiartec Kawasaki X2 EVO2 reinforced frame
Idiartec reinforced plate for Kawasaki X2 EVO2 jet-ski REF: PKX2-EVO2
329,95€Delivery within 2 to 10 days -
329,95€ Made to order, theoretically deliverable within 2 to 10 days
Reinforced frame Idiartec Kawasaki X2 EVO1
Idiartec reinforced plate for Kawasaki X2 EVO1 jet ski REF: PKX2-EVO1
329,95€Made to order, theoretically deliverable within 2 to 10 days -
325,95€ Delivery within 2 to 10 days
SOLAS propeller for Kawasaki 2T (750cc)
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
325,95€Delivery within 2 to 10 days -
284,95€ Delivery within 2 to 10 days
V-FORCE 3 valve box for Kawasaki
V-FORCE 3 valve box for Kawasaki brand jet-ski Reference: 360353 and 360233
284,95€Delivery within 2 to 10 days -
278,76€ 327,95€ -15% In stock
SOLAS propeller for Kawasaki 2T (900cc)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
278,76€ 327,95€ -15%Reduced price!In stock -
278,76€ 327,95€ -15% In stock
SOLAS propeller for Kawasaki 2T (1100cc)
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
278,76€ 327,95€ -15%Reduced price!In stock -
278,76€ 327,95€ -15% In stock
SOLAS propeller for Kawasaki 2T (800cc)
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
278,76€ 327,95€ -15%Reduced price!In stock -
269,96€ 299,95€ -10% In stock
SOLAS propeller for Kawasaki 2T (440-650cc)
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
269,96€ 299,95€ -10%Reduced price!In stock -
269,95€ Made to order, theoretically deliverable within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Made to order, theoretically deliverable within 2 to 10 days -
266,86€ 313,95€ -15% In stock
SOLAS propeller for Kawasaki 2T (1200cc)
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
266,86€ 313,95€ -15%Reduced price!In stock -
259,95€ Made to order, theoretically deliverable within 2 to 10 days
Kawa V-Force 3 reed valve kit. 2 cylinders
Carbon V-Force 3 reed valve kit for Kawasaki 2 cylinders ref. V3150-794-2 New V-Force 3 Carbon reed valve , + acceleration, + speed, the best for intake. Sold in pairs
259,95€Made to order, theoretically deliverable within 2 to 10 days -
259,95€ Delivery within 2 to 10 days
MSD ignition coil for 2 cylinders 2T
MSD IGNITION COIL FOR 2 CYLINDERS 2T ref. 4294
259,95€Delivery within 2 to 10 days -
239,96€ 299,95€ -20% In stock
Holders for 3 fuel cans
3 fuel can holders for jet skis Reference: 52-4911
239,96€ 299,95€ -20%Reduced price!In stock -
239,96€ 299,95€ -20% In stock
Professional Jet Ski Lifting Tool
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
239,96€ 299,95€ -20%Reduced price!In stock -
218,95€ Delivery within 2 to 10 days
COVERCRAFT Kawasaki Transport Cover
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
218,95€Delivery within 2 to 10 days -
184,45€ 204,95€ -10% In stock
Idiartec Reinforced Column for Kawasaki
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
184,45€ 204,95€ -10%Reduced price!In stock -
174,95€ Delivery within 2 to 10 days
TBM Hull Reinforcement for Kawasaki
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
174,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
159,96€ 199,95€ -20% In stock
Supports for 2 fuel cans
Supports for 2 fuel cans for jet ski Reference: 52-4910
159,96€ 199,95€ -20%Reduced price!In stock -
159,95€ Delivery within 1 to 3 weeks
Hydroturf carpet for Kawasaki X2 800 (07-08)
Hydroturf mat for Kawasaki X2 800 07-08 jet ski ref. HT41 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Hydroturf Carpet for Kawasaki X2 650 Jet Ski
Hydroturf Carpet for Kawasaki X2 650 Jet Ski ref. HT40 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
139,95€ In stock
NEKEN 28mm reinforced handlebar,...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
139,95€In stock -
134,95€ Made to order, theoretically deliverable within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Made to order, theoretically deliverable within 2 to 10 days -
132,95€ 139,95€ -5% In stock
ODI Reinforced Universal Handlebar
ODI reinforced handlebar for saddle jet Reference: 06013082
132,95€ 139,95€ -5%Reduced price!In stock -
129,95€ Made to order, theoretically deliverable within 2 to 10 days
Kawasaki on/off switch with circuit breaker
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
129,95€Made to order, theoretically deliverable within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Made to order, theoretically deliverable within 2 to 10 days -
119,95€ In stock
Hood attachment strap set for jet-ski
Bonnet attachment strap set ref. 920723812 / 920723815
119,95€In stock -
119,95€ Made to order, theoretically deliverable within 2 to 10 days
Kawasaki Waterproof Screw-in Switch
Kawasaki ON/OFF switch Under the stalk
119,95€Made to order, theoretically deliverable within 2 to 10 days -
119,95€ Made to order, theoretically deliverable within 2 to 10 days
Idiartec double start/stop switch (20+)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
119,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
RACING VALVE BOYESEN FIBER KAWASAKI
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
109,95€Delivery within 2 to 10 days -
109,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
84,95€ Delivery within 2 to 10 days
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
84,95€Delivery within 2 to 10 days -
78,95€ Delivery within 2 to 10 days
RIVA high performance air filter for 2T
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
78,95€Delivery within 2 to 10 days -
69,95€ Delivery within 2 to 10 days
Universal saddle kit from 22 to 28mm
Universal bridge kit from 22 to 28mm for Yamaha, Kawasaki, Seadoo jet skis and many others... Reference : RR20031901: 20mm RR20031902: 30mm RR20031902: 50mm
69,95€Delivery within 2 to 10 days -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
69,95€ Delivery within 2 to 10 days
Flywheel puller for Kawasaki Ultra 150
Flywheel puller for Kawasaki Ultra 150 ref. 003-318-01
69,95€Delivery within 2 to 10 days -
68,95€ Delivery within 2 to 10 days
RIVA hood attachment set for jet-ski
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
68,95€Delivery within 2 to 10 days -
63,95€ Delivery within 2 to 10 days
PROK air filter for 1 carburetor
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
63,95€Delivery within 2 to 10 days -
56,95€ Delivery within 2 to 10 days
NEKEN 22mm Handlebar with Reinforcement Bar
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
56,95€Delivery within 2 to 10 days -
53,95€ Delivery within 2 to 10 days
Duckbill and bracket kit for Kawasaki
Duckbill and bracket kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
53,95€Delivery within 2 to 10 days -
50,30€ 52,95€ -5% In stock
VersiPlug bilge drain for Kawasaki all models
VersiPlug ball-type bilge plug for Kawasaki all models, in aluminum or black ref. PD1301, PD1300 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
50,30€ 52,95€ -5%Reduced price!In stock -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
45,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
45,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
45,95€Delivery within 2 to 10 days -
42,95€ Made to order, theoretically deliverable within 2 to 10 days
3M neoprene spray glue 500ml
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
42,95€Made to order, theoretically deliverable within 2 to 10 days -
42,46€ 49,95€ -15% In stock
Riva 38mm Air Filter Adapter
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
42,46€ 49,95€ -15%Reduced price!In stock -
40,95€ Delivery within 1 to 3 weeks
Hydroturf lateral foot block 61cm x 6.5cm
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
40,95€Delivery within 1 to 3 weeks -
40,95€ Delivery within 2 to 10 days
Carb support. for JS550 spacer
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
40,95€Delivery within 2 to 10 days -
38,95€ Delivery within 2 to 10 days
Factory exhaust hose 100x52mm
POT HOSE 100MM X 52MM (4''X 2-1/16'') FACTORY PIPE Ref: COMHOS0100
38,95€Delivery within 2 to 10 days -
36,95€ In stock
Dissolved Hydroturf Carpet Glue / Jettrim
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
36,95€In stock -
34,95€ Delivery within 2 to 10 days
Connection for flushing hoses
Instant disassembly connection for garden hose Ref: SC-2900
34,95€Delivery within 2 to 10 days -
32,36€ 35,95€ -10% In stock
RIVA pre-filter for 2T engine air filter
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
32,36€ 35,95€ -10%Reduced price!In stock
