- For Seadoo 4-stroke watercraft with a 1630 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Intercooler hose kit from RIVA Racing for Seadoo 215/230/260 watercraft from 2013 to 2017 Reference: RS17090-TK-1
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Oil Vapor Tank and RIVA Breather Kit for Seadoo RXP 215, RXT 215, RXP-X 255, RXT-X 255, GTX 4 tec, RXP-X 260 watercraft, all models of RXT & GTX unsuspended, RXP-X 300, RXT-X 300, GTX Ltd 300, RXT 230, GTX 155, GTR 230, GTR-X 230 Reference: RS19050-BCC-6
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref. : 01.5594.XX
RIVA Racing reinforcement for Seadoo 215, 255, 260 and 300 watercraft intake manifold Ref: RS12050-IMG
WISECO piston for seadoo side 100.50mm ref. : 40038M10050
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Riva free exhaust kit for seadoo all S3 and T3, including RXT-X 260, IS, AS and RXP-X 260 Reference: RS16090
Solas stainless steel wear ring 161mm for seadoo GTR 230 and RXT 300, RXP 300, GTX 300 Ref: SX-HS-161
WISECO piston for seadoo coast 101.00mm ref. : 40038M10100
WISECO piston for seadoo standard side 100.00mm ref. : 40038M10000
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Original Seadoo bilge pump kit for Sea-doo watercraft - RXT / GTX / Wake Pro from 2018 and above - Fish Pro from 2019 and up - GTI / GTI SE / GTR from 2020 and more - RXP-X from 2021 and up Reference: 295100739
Ring set for 130mm Forged Piston for 1730cc engine from EASY RIDER for Seadoo Watercraft Sold individually and for the RS-3056 piston kit Reference: RS-3057
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 159mm Solas for seadoo 215 / 255 / 260 Ref: SRX-HS-159-02
Supports for 2 fuel cans for jet ski Reference: 52-4910
Original OEM Fuel Injector provided by EASY RIDER for Seadoo 1630 watercraft Reference: RS-5558
RIVA Racing free exhaust kit for Seadoo GTR 230 and GTR-X 230 watercraft Ref: RS16160
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
Hydroturf mat for Seadoo GTI / GTI SE 130, 170 / Wake 170 / GTR 230 watercraft from 2020 and up Reference: HT889 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
3M pre-glued Hydroturf mat for Seadoo RXP-X 260 (12-16), RXP-X 300 (16-20) and GTR-X 230 (17-19) watercraft Ref. : HT892-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Ring Kit for Forged Piston in 100mm (99.93mm) from EASY RIDER for Seadoo Watercraft Sold individually Ref: RS-3062
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT-X/GTX-SC/RXP-X 08 (255HP) Ref: RS1751-HDW-948
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
WORX Racing exhaust system for Seadoo 4 tec watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
Hydroturf mat for Seadoo GTI and GTI SE 130 (11-18) watercraft, GTI SE & Ltd. 155, GTS 130, GTR 215 (12-19), Wake 155 ref. HT884 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
ODI reinforced handlebar for saddle jet Reference: 06013082
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Compressor tool 16 teeth (SD 215) Ref: 613-96016