Subcategories
VersiPlug ball bilge drain for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows you to empty the hold during navigation and prevent water from entering when the jet ski remains static, using water pressure. Sold individually.
Anti-spray bib in 41 inch or 104cm from Hydroturf for jet-ski Reference: TS01
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
Hood gasket 13mm (1/2") for arm jet ref. TS55
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
Factory pipe Sec SXR800 pot hose
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
MUFFLER HOSE 100MM X 52MM (4''X 2-1/16'') FACTORY PIPE Ref: COMHOS0100
Stainless steel towing ring for arm jet ref. QL-02
PJS ignition advance kit Kawasaki750SX/SX800R
Water protection sock for K&N air filter (see table below)
Lateral foot block 33x5cm ref. TS43
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
Electronic chip for SXR800 Factory pipe exhaust probe
2 inch PAD or 5.08cm from Hydroturf for Kawasaki 750 SX / SXI / 800 SXR arm jet Reference: TS402
Pre-filter for high performance RY1301-1 air filter from RIVA Racing Reference: RY1301PF-B
Set of 4 anodized mass-size aluminum washers to replace the adjustable shim plate fixing washers. Ref: 04-04-01X
COVER FOR TAU CETI TORNADO AIR FILTER Ref: PF-TCP-25
Bearing and seal kit for plate from RRP or RIVA Racing for arm jet Reference: 03-05-069
Rear foot block 5.08cm ref. KICK02
LOW RPM ADJUSTMENT SCREW FOR ORIGINAL K 800 SXR CARB Ref: SA-500
PAD of 1 inch or 2.54cm from Hydroturf for Kawasaki 750 SX / SXI / 800 SXR arm jet Reference: TS401
Bearing and seal kit for Blowsion Universal OVP deck for arm jet Reference: 03-05-092
Hot Products Bilge Pump Bracket for Kawasaki 550 SX / 650 SX / 750 SX-SXI ref. 57-3024
Tau ceti air filter cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
WSM or SBT (depending on availability) air filter adapter for Keihin 38 / 40 / 42 mm carburettor Ref: 006-665
ADA domed cylinder head O-ring for KAWASAKI 800
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
3/8'' (9.5mm) water circuit filter for Factory Pipe pot ref. COMFTG0036
COVER FOR AIR FILTER TAU CETI ROUND EP:1,5'' Ref: PF-TCP-01
Instant disassembly connection for garden hose Ref: SC-2900
MUFFLER HOSE 50MM X 63MM (2'' X 2-1/2'') FACTORY PIPE Ref: COMHOSO080
Original carburetor high speed adjustment screw Gp800 / SD951 / SXR800 ref. SA-100
Rear foot block 2.54cm ref. KICK01
WSM or SBT adaptable propeller remover (Depending on availability) for original Yamaha, Kawasaki, Seadoo, Polaris, Tigershark jet ski propellers
Aluminum nose bolt for Kawasaki ref. 57-62XX
H2O water protection sock for PROK air filter ref. 006-580
Skat Trak propeller rubber for KAWASAKI / SEADOO / YAMAHA Swirl propeller ref. RIMPNOSEBOOT7
Crankcase Block Off Kawasaki 650 / 750 ref. 011-210
Kawasaki magnetic steering wheel puller Kawasaki Fly Wheel Puller ref. 003-317 / 003-318
SOLAS propeller remover for Kawasaki jet-ski Reference: WR001, WR002 and WR005
SOLAS propeller tip for Kawasaki jet-ski
Factory Pipe water adjustment screw ref. COMFAS0013
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tube or 1L jar References: BOKM502930 or BOKM502932
Oil pump removal plate and seals adaptable WSM or SBT (depending on availability) for Jet-ski Yamaha, Kawasaki, Sea-doo and Polaris
SKAT-TRAK PROPELLER O'RING FOR KAWASAKI Ref: RIMPKAWORING
Factory Pipe pot screw 10x25x50mm ref. COMFAS0060
Factory Pipe Water Adjusting Screw Nut ref. COMFAS0014
Adaptable seal WSM or SBT (Depending on arrival) for Block Off casing for Kawasaki, Polaris, Seadoo and Yamaha jet-skis