Subcategories
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
Rick Roy Upper Arm (Chin Pad) Ninja Full Carbon ref. NINJA-COM-PAD
Data acquisition systems Ref: INN-3877
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose From) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
V-Force 3 Carbon Reed Valve Kit for Kawasaki 2 Cylinders ref. V3150-794-2 New Carbon V-Force 3 reed valve , + acceleration, + speed, the best for intake. Sold in pairs
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
WORX Scoop Scoop for Kawasaki SX or X2 650cc Ref: WR202
Supports for 2 fuel cans for jet ski Reference: 52-4910
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
Kawasaki ON/OFF switch Under the comodo
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
Hydroturf mat for Kawasaki 650 SX jet ski ref. HT65 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Blowsion aluminum exhaust outlet for Kawasaki jet skis, SXR 800 and SXR 1500 models as well as Yamaha Superjet TR-1
IDIARTEC start and stop switch Ref: CSS
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
ANTI ARM EXTENSION CORD ALL MODELS Ref: 03-04-151
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
Rear wedge bump + 2.54cm ref. MISC-JT600
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
Flywheel puller for Kawasaki Ultra 150 ref. 003-318-01
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Duckbill and bracket kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
Dark Grey Anodized Aluminum Spacer for Rick Roy Cast Arm Support Axle Ref: AL-BP-SPC
VersiPlug ball shim plug for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
POT HOSE 100MM X 52MM (4''X 2-1/16'') FACTORY PIPE Ref: COMHOS0100
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Instant disassembly connection for garden hose Ref: SC-2900
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
stainless steel towing ring for arm jet ref. QL-02
Rear footrest 5.08cm ref. KICK02
Hot Products Bilge Pump Bracket for Kawasaki 550 SX / 650 SX / 750 SX-SXI ref. 57-3024