Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke 1800cc jet-skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha FX HO / SHO / SVHO jet ski Reference: BGG-SHO
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha HO/ SHO/ SVHO jet ski 2012 and up ref. YSHO/HO101
Box + right side electronic trigger (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO jet ski? FZR SVHO, FZS SVHO and GP1800 Reference: BGD-SHO
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Worx cooling kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the No. 2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1,2 or 3 fittings to...
Wiseco piston 86mm (8.6:1) for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Comes with segments, clips and axle.
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO jet ski (18+) Ref: RY12080-IMUK
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
Turbine Anti-Cavitation Cone from WORX Racing for Yamaha SVHO jet-ski Ref: WR06019
Riva Racing brand air filter in original format for Yamaha jet ski HO / SHO / SVHO / FZR / FZS / FZR SVHO / FZS SVHO / VXR / VXS References: RY13040-OE-1
Supports for 2 fuel cans for jet ski Reference: 52-4910
Pressure regulator box at 3 bar (29.7 PSI) from RIVA Racing for jet ski Yamaha SHO 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and more Ref: RY11740-MS-3
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
RecDeck Cooler Bags for Jetski Yamaha FX References: F3X-F48A0-V0-00
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Hydroturf mat for jet ski Yamaha SHO and SHO Cruiser from (12-16) / FX HO, HO Cruiser, SVHO and SVHO Cruiser from (12-18) Reference: HTFX2 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
WSM air filter (assembly to replace the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for Yamaha FX HO, HO Cruiser, SVHO and SVHO Cruiser jet skis from 2019 and up ref. HTFX3 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Anti-Cavitation Kit from WORX RACING for Ecope Worx WR237 for Yamaha FX HO, SHO and SVHO jet-ski from 2012 to 2014 Ref: WR0703
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Storage under hood for Yamaha jetski References: F5G-U511A-V0-00
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2020 and above Reference: RY1013-WS-82
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
Yamaha 1.8 Compressed Freewheel Retainer Tool for bearing removal Ref: RY17040-SCT
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Side wedge for Yamaha 1.8L ref. RY10040-TB-OIB125
Original workshop manual in paper format for jet ski of the brand Yamaha SVHO, Cruiser and Limited from the year 2017 Reference: LIT-18616-FX-V5
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Handlebar bag for Yamaha jetski from 2019 and up Reference: MWV-HPACK-00-00
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Riva anti cavitation kit for Yamaha HO / SHO / SVHO (2012 and +) with scoop Riva RY22070 Ref: RY25070 This kit allows to plug this mega'tron on the scoop and the water inlet.
Riva reinforced liner for Yamaha 1.8L Ref: RY10040-SLV-615
Yamaha Jet Ski Glove Box Organizer References: F5G-F841P-V0-00
Original workshop manual in paper format for Yamaha jet skis, FX SVHO and Cruiser SVHO models from 2014 Reference: LIT-18616-03-52
High volume single fuel pump from RIVA Racing for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
IDIARTEC start and stop switch Ref: CSS
Riva valve seal kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Adapter for (Dump Valve, Pressure Regulator, etc.) on the intake manifold of Yamaha 1800 jet skis (SHO / SVHO) from RIVA Racing Reference: RY12110-VPA
Riva air filter only for RK13090 and RK13100 kit Ref: RK13090-2
RIVA RACING Reinforced Intake Valve (original side) for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-0
Reinforced Intake Valve +1mm RIVA RACING for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-1
Riva driveshaft hose replacement aluminum tube kit for Yamaha HO / SHO / SVHO / FZR /FZS Ref: RY30040-DSS
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT