Subcategories
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Hood attachment strap set ref. 920723812 / 920723815
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Suction Port Adapter and Amplifier from RIVA Racing for Seadoo 230 and 300 watercraft Reference: RS12050-VPA
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
EASY RIDER 95lbs Fuel Injector Adapter with Aluminum Spacer for Seadoo Watercraft Ref: RS-5560
Column riser for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Maptuner diagnostic extension harness for Seadoo BRP watercraft Reference: 01-MT067
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
WSM Service Tool Kit for Seadoo Compressor 16 Teeth Ref. 950-110K
Riva air filter for Riva kit for RS13050 kit Reference: RS13050-3
Handlebar extension for Seadoo watercraft or jet ski: - RXT 325 - RXP all models - Spark (14-15) - GTX/RXT (02-17) - GTI (06-19) Reference: RS24100-BES-1
Cylinder head screws or set of cylinder head bolts, equivalent version to the original from EASY RIDER, fits 1500 / 1630 / 1730cc for Seadoo watercraft Reference: RS-4126
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored permanently in the water.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced stainless steel washers for Sea-doo hull: Reference: RS4-120-WUK
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Connection Kit for Seadoo 1600 Coil from EASY RIDER Ref: RS-5562
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
VersiPlug ball-type bilge drain for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
Seadoo Torx Female Bit Set Ref: LS26750
VersiPlug ball-type bilge drain for Seadoo from 2010 and up, in aluminum or black ref. PD1420, PD1421 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Hydroturf side foot wedge to stick in 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
RIVA Maptuner connection cable for Seadoo jet ski (all models) (including only the connection cable from the Maptuner box to the ECU) ref. 01-MT013
ODI handle adapter/extension kit for Seadoo watercraft, all models from 2002 to 2025 (except Spark 2016+ & RXT/GTX 2018+) Reference: L72SDRX14
Instant disassembly connection for garden hose Ref: SC-2900
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
WSM Adapter for Engine Alignment Tool for Seadoo 185 & 215 Watercraft Ref. : 950-150
Alignment Tool Adapter from WSM for Seadoo 580 / 720 / 951 watercraft from 1992 to 2003 Ref. : 950-145 OEM: 529035590
Gear Holding Tool for Seadoo Compressor in 16 teeth Ref. : 950-110-16
4 STUD SOCKET - 4 PIN SOCKET (sea-doo compressor) ref. 950-195 ref. origin: 529035948
BOSCH VT1100 Fuel Injector Upper Hats for Seadoo 230 and 300 Watercraft Ref: VT1100-THK
Stainless steel towing ring for saddle jet skis
PAD (Protective Foam) for Handlebar with RIVA Racing Reinforcement Ref: PAD01-235
Seadoo Torx Bit Set Ref: LS26000
21mm Reinforced Screw, from EASY RIDER for All Seadoo 4-stroke Flywheels Reference: RS-4320
23mm Reinforced Screw, from EASY RIDER for racing flywheel, mounts on Seadoo 4-stroke watercraft Reference: RS-4321
Skat Trak Super Slim Line propeller rubber for SEADOO ref. RIMPNOSEBOOTSDSSL
Steering Cable Extension (+2cm) from EASY RIDER for Magnum Pump Set-Back Easy Rider Ref. : RS-4927