No products
POLARIS
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
POLARIS
Subcategories
-
1 499,95€ Delivery within 2 to 10 daysRRP Billet Light V2 Arm Yamaha / Kawasaki
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
1 499,95€Delivery within 2 to 10 days -
609,95€ Delivery within 30 days
Rick roy Ninja Full Carbon upper arm
Rick Roy Upper Arm (Chin Pad) Ninja Full Carbon ref. NINJA-COM-PAD
609,95€Delivery within 30 days -
449,95€ Delivery within 2 to 10 days
Factory Type B Exhaust Elbow
Exhaust elbow for Factory type B pot ref. COMCST0040
449,95€Delivery within 2 to 10 days -
439,95€ Delivery within 2 to 10 days
SOLAS propeller for Polaris jet-ski
Propellers for all Polaris jet skis: PA-CD-12/18, PA-CD-13/19, PA-CD-15/21, PB-SC-X (see the correspondence table at the bottom of the page)
439,95€Delivery within 2 to 10 days -
349,95€ Delivery within 2 to 10 days
Complete steering box diameter 22.2mm
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose From) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
349,95€Delivery within 2 to 10 days -
299,95€ In stock
Professional lifting tool for jet skis
Professional lifting tool for stand-up jet skis and jet skis (1, 2, 3 seats) & SUVs up to 700kg Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
299,95€In stock -
299,95€ Delivery within 2 to 10 days
Sponson Racing WORX kit for Ultra 130 / 150
WORX brand Sponson Racing kit for Kawasaki Ultra 130 / 150 jet ski Ref: WR519
299,95€Delivery within 2 to 10 days -
279,95€ Made to order, theoretically deliverable within 2 to 10 days
WORX scoop for GPR 800/1200/1300
WORX scoop-type scoop for Yamaha GPR 800 / 1200 and 1300 jet skis Ref: WR218
279,95€Made to order, theoretically deliverable within 2 to 10 days -
269,95€ Made to order, theoretically deliverable within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Made to order, theoretically deliverable within 2 to 10 days -
259,95€ Delivery within 2 to 10 days
RRP Carbon Tube in 20" and 26"
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
259,95€Delivery within 2 to 10 days -
239,96€ 299,95€ -20% In stock
Holders for 3 fuel cans
Holders for 3 fuel cans for jet ski Reference: 52-4911
239,96€ 299,95€ -20%Reduced price!In stock -
184,95€ Delivery within 2 to 10 days
Quick bilge vacuum kit for arm jet
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
184,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
169,95€ Made to order, theoretically deliverable within 2 to 10 days
Black hull strake in 3M - 7.60M
Blowsion hull surround and protection for hand jet. 3M pre-glued plastic material, black color, 7.6 meters long Reference: 04-02-307
169,95€Made to order, theoretically deliverable within 2 to 10 days -
159,96€ 199,95€ -20% In stock
Holders for 2 fuel cans
Holders for 2 fuel cans for jet ski Reference: 52-4910
159,96€ 199,95€ -20%Reduced price!In stock -
159,95€ Delivery within 1 to 3 weeks
Mats for Polaris SLXH (98)/ SLH & SLX (99)
Hydroturf mat for Polaris SLXH (98)/SLH & SLX (99) jet ski ref. HT92 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Polaris Virage and Freedom jet ski mats
Hydroturf mat for Polaris Virage/Freedom jet ski ref. HT94 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Hydroturf mat for Polaris MSX jet ski
Hydroturf mat for Polaris MSX jet ski ref. HT97 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Hydroturf mat for Polaris Genesis jet ski
Hydroturf mat for Polaris Genesis jet ski ref. HT95 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Carpet for Polaris SLT / SLTX / X-45 jet ski
Hydroturf mat for Polaris SLT / SLTX / X-45 jet ski ref. HT93 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Polaris Octane Jet Ski Hydroturf Mat
Polaris Octane Jet Ski Hydroturf Mat ref. HT96 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
149,95€ In stock
NEKEN 28mm Reinforced Fluorescent Green...
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3780
149,95€In stock -
134,95€ Made to order, theoretically deliverable within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Made to order, theoretically deliverable within 2 to 10 days -
125,96€ 139,95€ -10% In stock
SOLAS scoop for Polaris
SOLAS scoop for Polaris: - PRO 1200 (00-02) - TX 1200 Turn (00-02) / TXI 1200 Turn (01-02) / Turn 1 (02-04) / Turn 700 (00-04) - SL 1050 (97) / SLX 1050 (99) / SLXH 1050 (98) / SLTX 1050 (96-98) / SL 900 (96-97) / SLX PRO 785 (96-01) / SL 780 (96-97) / SLT 780 (96-97) / SL 750 (94-95) / SLT 750 (94-95) / SL 750 (93) / SLH 700 (98-01) / SL 700 DLX (97) /...
125,96€ 139,95€ -10%Reduced price!In stock -
125,96€ 139,95€ -10% In stock
ODI Reinforced Universal Handlebar
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
125,96€ 139,95€ -10%Reduced price!In stock -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
RRP pad holder and steering stop
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
109,95€Delivery within 2 to 10 days -
109,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
107,96€ 119,95€ -10% In stock
Idiartec double start/stop switch (20+)
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
107,96€ 119,95€ -10%Reduced price!In stock -
101,96€ 119,95€ -15% In stock
Jet ski hood tie-down strap set
Hood attachment strap set ref. 920723812 / 920723815
101,96€ 119,95€ -15%Reduced price!In stock -
96,95€ Delivery within 2 to 10 days
Blowsion surround and hull protection
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
96,95€Delivery within 2 to 10 days -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
84,50€ 88,95€ -5% In stock
Anti-stretch cord
ANTI-ARM EXTENSION CORD ALL MODELS Ref: 03-04-151
84,50€ 88,95€ -5%Reduced price!In stock -
80,70€ 84,95€ -5% In stock
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
80,70€ 84,95€ -5%Reduced price!In stock -
78,95€ Delivery within 2 to 10 days
RIVA high performance air filter for 2T
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
78,95€Delivery within 2 to 10 days -
70,95€ Delivery within 1 to 3 weeks
Rear wedge bump + 2.54cm
Rear wedge bump + 2.54cm ref. MISC-JT600
70,95€Delivery within 1 to 3 weeks -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
68,95€ Delivery within 2 to 10 days
RIVA hood attachment set for jet-ski
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
68,95€Delivery within 2 to 10 days -
64,95€ In stock
PROK air filter for 1 carburetor
PROK air filter for 1 jet ski carburetor ref. 006-585
64,95€In stock -
55,95€ Made to order, theoretically deliverable within 2 to 10 days
Hood gasket for Octane, Blaster 1, SJ 94+
Original type hood seal for Yamaha Superjet, FX1, Blaster, Polaris Octane ref. OCT-HS
55,95€Made to order, theoretically deliverable within 2 to 10 days -
53,06€ 58,95€ -10% In stock
Bilge drain for Yamaha / Seadoo / Honda /...
VersiPlug ball-type bilge pump for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and later, available in aluminum or black ref. PD1401, PD1400 A plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains stationary, using water pressure. Sold individually.
53,06€ 58,95€ -10%Reduced price!In stock -
51,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 22mm handlebar with reinforcement bar
NEKEN handlebar with reinforcement bar for sit-down jet ski ref. 060129XX
51,95€Made to order, theoretically deliverable within 2 to 10 days -
49,46€ 54,95€ -10% In stock
Dark aluminum spacer for arm support axle
Dark Grey Anodized Aluminum Spacer for Rick Roy Cast Arm Support Axle Ref: AL-BP-SPC
49,46€ 54,95€ -10%Reduced price!In stock -
48,95€ Delivery within 1 to 3 weeks
13mm Hydroturf Hood Seal for Arm Jet
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
48,95€Delivery within 1 to 3 weeks -
48,95€ Delivery within 1 to 3 weeks
2" hydroturf rear corner foot block
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
48,95€Delivery within 1 to 3 weeks -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
45,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
45,95€Delivery within 2 to 10 days -
44,95€ Made to order, theoretically deliverable within 1 to 3 weeks
Hydroturf rear footpeg + 5.08cm
Rear footrest 5.08cm ref. KICK02
44,95€Made to order, theoretically deliverable within 1 to 3 weeks -
42,95€ Made to order, theoretically deliverable within 2 to 10 days
3M neoprene spray glue 500ml
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
42,95€Made to order, theoretically deliverable within 2 to 10 days -
42,46€ 49,95€ -15% In stock
Riva 38mm Air Filter Adapter
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
42,46€ 49,95€ -15%Reduced price!In stock -
40,95€ Delivery within 1 to 3 weeks
JETTRIM rear shim + 5.08cm (+2")
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
40,95€Delivery within 1 to 3 weeks -
38,95€ Made to order, theoretically deliverable within 1 to 3 weeks
Hydroturf lateral footrest 61cm x 6.5cm
Hydroturf lateral footrest to be glued on, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
38,95€Made to order, theoretically deliverable within 1 to 3 weeks -
37,95€ Made to order, theoretically deliverable within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
37,95€Made to order, theoretically deliverable within 2 to 10 days
