No products
S4
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
S4
Subcategories
-
1 499,95€ Delivery within 2 to 10 daysSOLAS pump assembly for Hydrospace S4
SOLAS 12 vane pump assembly for Hydrospace S4 Ref: HS-PM-140/74T
1 499,95€Delivery within 2 to 10 days -
1 499,95€ Delivery within 2 to 10 days
RRP Billet Light V2 Arm Yamaha / Kawasaki
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
1 499,95€Delivery within 2 to 10 days -
609,95€ Delivery within 30 days
Rick roy Ninja Full Carbon upper arm
Rick Roy Upper Arm (Chin Pad) Ninja Full Carbon ref. NINJA-COM-PAD
609,95€Delivery within 30 days -
529,95€ Delivery within 2 to 10 days
Jettrim mat 8 pieces for HSR S4 arm jet
Jettrim mat 8 pieces for HSR Benelli S4 arm jet Ref. : HS102
529,95€Delivery within 2 to 10 days -
499,95€ Delivery within 2 to 10 days
ECU/CDI/ECU reprogramming
ECU/CDI/ECU reprogramming Reference: RECUCDIC
499,95€Delivery within 2 to 10 days -
419,95€ Delivery within 2 to 10 days
T2 Race Hull Plate for HSR S4
T2 racing hull plate for HSR Benelli (Hydrospace) S4 Ref: PW-02-300-T2-HFC The T2 Race HFC plate by Pro Watercraft Racing is the latest generation of high-performance plates, born in Havasu, the jet-ski capital of the US. This one is perfect in the curves, it provides more stability in a straight line, and a pronounced engagement in the curves. Which...
419,95€Delivery within 2 to 10 days -
349,95€ Delivery within 2 to 10 days
Complete steering box diameter 22.2mm
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose From) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
349,95€Delivery within 2 to 10 days -
269,95€ Delivery within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Delivery within 2 to 10 days -
259,95€ Delivery within 2 to 10 days
RRP Carbon Tube in 20" and 26"
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
259,95€Delivery within 2 to 10 days -
246,46€ 289,95€ -15% In stock
Holders for 3 fuel cans
3 Fuel Can Holders for Jet Ski Reference: 52-4911
246,46€ 289,95€ -15%Reduced price!In stock -
239,96€ 299,95€ -20% In stock
Professional Jet Ski Lifting Tool
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
239,96€ 299,95€ -20%Reduced price!In stock -
199,95€ Delivery within 2 to 10 days
Supports for 2 fuel cans
Supports for 2 fuel cans for jet ski Reference: 52-4910
199,95€Delivery within 2 to 10 days -
187,95€ Delivery within 2 to 10 days
Worx Sponsors for Yamaha WaveBlaster (93-97)
Sponsors from Worx Racing for Yamaha brand jet-ski, WaveBlaster model from 1993 to 1997 Reference: WR546
187,95€Delivery within 2 to 10 days -
184,95€ Delivery within 2 to 10 days
Quick bilge vacuum kit for arm jet
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
184,95€Delivery within 2 to 10 days -
175,95€ Delivery within 2 to 10 days
Black hull strake in 3M - 7.60M
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
175,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
159,95€ Delivery within 1 to 3 weeks
Hydroturf mat for HSR Benelli S4 hand jet
Hydroturf mat for hand jet HSR, BENELLI, HYDROSPACE, S4 ref. HT100 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
134,95€ Delivery within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Delivery within 2 to 10 days -
119,95€ Delivery within 2 to 10 days
Idiartec double start/stop switch (20+)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
119,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
RRP pad holder and steering stop
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
109,95€Delivery within 2 to 10 days -
96,95€ Delivery within 2 to 10 days
Blowsion surround and hull protection
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
96,95€Delivery within 2 to 10 days -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
88,95€ Delivery within 2 to 10 days
Anti-stretch cord
ANTI ARM EXTENSION CORD ALL MODELS Ref: 03-04-151
88,95€Delivery within 2 to 10 days -
84,95€ Delivery within 2 to 10 days
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
84,95€Delivery within 2 to 10 days -
70,95€ Delivery within 1 to 3 weeks
Rear wedge bump + 2.54cm
Rear wedge bump + 2.54cm ref. MISC-JT600
70,95€Delivery within 1 to 3 weeks -
68,95€ Delivery within 2 to 10 days
VersiPlug ball bilge vacuum for Hydrospace
VersiPlug ball bilge drain for Hydrospace S4, HSR Benelli, aluminum or black color ref. PD1150, PD1151 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
68,95€Delivery within 2 to 10 days -
53,06€ 58,95€ -10% In stock
Dark Aluminum Spacer for Arm Support Axle
Dark Grey Anodized Aluminum Spacer for Rick Roy Cast Arm Support Axle Ref: AL-BP-SPC
53,06€ 58,95€ -10%Reduced price!In stock -
48,95€ Delivery within 1 to 3 weeks
13mm Hydroturf Hood Seal for Arm Jet
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
48,95€Delivery within 1 to 3 weeks -
48,95€ Delivery within 1 to 3 weeks
2" hydroturf rear corner foot block
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
48,95€Delivery within 1 to 3 weeks -
RIVA Black End Caps and Clamps for ODI...
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
45,95€Delivery within 2 to 10 days -
RIVA Black End Caps and Clamps for ODI...
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
45,95€Delivery within 2 to 10 days -
RIVA Black End Caps and Clamps for ODI...
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
45,95€Delivery within 2 to 10 days -
44,95€ Delivery within 2 to 10 days
3M neoprene glue spray 500ml
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
44,95€Delivery within 2 to 10 days -
40,95€ Delivery within 1 to 3 weeks
JETTRIM rear shim + 5.08cm (+2")
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
40,95€Delivery within 1 to 3 weeks -
40,95€ Delivery within 1 to 3 weeks
Hydroturf lateral foot block 61cm x 6.5cm
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
40,95€Delivery within 1 to 3 weeks -
35,10€ 36,95€ -5% In stock
Dissolved Hydroturf Carpet Glue / Jettrim
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
35,10€ 36,95€ -5%Reduced price!In stock -
31,95€ In stock
Stainless steel towing ring with arm jet
stainless steel towing ring for arm jet ref. QL-02
31,95€In stock -
30,95€ Delivery within 1 to 3 weeks
Hydroturf rear footrest + 5.08cm
Rear footrest 5.08cm ref. KICK02
30,95€Delivery within 1 to 3 weeks -
26,95€ Delivery within 2 to 10 days
-
24,95€ Delivery within 2 to 10 days
External aluminum washers for footrests
Set of 4 anodized aluminum washers to replace the washers for fixing adjustable shim plates. Ref: 04-04-01X
24,95€Delivery within 2 to 10 days -
24,95€ Delivery within 1 to 3 weeks
Lateral foot block 33cm x 5cm Hydroturf
Lateral foot block 33x5cm ref. TS43
24,95€Delivery within 1 to 3 weeks -
23,95€ Delivery within 1 to 3 weeks
Hydroturf rear footrest + 2.54cm
Rear footrest 2.54cm ref. KICK01
23,95€Delivery within 1 to 3 weeks -
19,95€ Delivery within 2 to 10 days
Special glue for hydroturf carpet / Jettrim
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tubes or 1L jars. References: BOKM502930 or BOKM502932
19,95€Delivery within 2 to 10 days -
18,95€ Delivery within 2 to 10 days
Propeller disassembler for original jetski...
WSM or SBT adaptable propeller remover (depending on availability) for original jet ski propeller Yamaha, Kawasaki, Seadoo, Polaris, Tigershark
18,95€Delivery within 2 to 10 days -
5,95€ In stock
