No products
Evacuation pour Kawasaki
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Destocking
- E-Foil
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Jet pilot equipment
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
vehiculier
Evacuation pour Kawasaki
Subcategories
-
269,95€ Made to order, theoretically deliverable within 2 to 10 daysIDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Made to order, theoretically deliverable within 2 to 10 days -
184,95€ Delivery within 2 to 10 days
Quick bilge vacuum kit for arm jet
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
184,95€Delivery within 2 to 10 days -
159,95€ Delivery within 2 to 10 days
Universal bilge pump switch
Universal bilge pump switch ref. JP7043 This attaches to the handlebars
159,95€Delivery within 2 to 10 days -
149,95€ Made to order, theoretically deliverable within 2 to 10 days
Rule 500 Automatic Bilge Pump
Rule 500 GPH AUTOMATIC bilge pump. Allows you to empty the engine bilge very quickly in the event of damage or simply capsizing. ref. 25S-6WC
149,95€Made to order, theoretically deliverable within 2 to 10 days -
128,95€ Delivery within 2 to 10 days
Waterproof switch with handlebar mount
WATERPROOF SWITCH UNIVERSAL HANDLEBAR MOUNTING Ref: 57-3006 Universal handlebar mount on/off switch
128,95€Delivery within 2 to 10 days -
119,95€ Made to order, theoretically deliverable within 2 to 10 days
Kawasaki Waterproof Screw-in Switch
Kawasaki ON/OFF switch Under the stalk
119,95€Made to order, theoretically deliverable within 2 to 10 days -
104,95€ Made to order, theoretically deliverable within 2 to 10 days
RRP bilge vacuum valve (sold individually)
Rick Roy Bilge Vacuum Valve Only (Sold Individually) ref. RRP-SCU-V
104,95€Made to order, theoretically deliverable within 2 to 10 days -
80,95€ Delivery within 2 to 10 days
Rule 1100GPH bilge pump - 27D
Rule 1100 GPH standard bilge pump with a flow rate of 4100 L/H and a height of 108 mm ref. 27D
80,95€Delivery within 2 to 10 days -
67,95€ Delivery within 2 to 10 days
Rule 800 bilge pump - 3025 L/H
Rule 800 GPH bilge pump, allows the engine bilge to be emptied very quickly in the event of damage or simply an overturn. ref. 20R
67,95€Delivery within 2 to 10 days -
59,95€ Delivery within 2 to 10 days
-
59,95€ Made to order, theoretically deliverable within 2 to 10 days
Duckbill kit and mounting hardware for...
Duckbill kit and mounting hardware for Kawasaki Ref: 57-4065 / A4026 / 48020001
59,95€Made to order, theoretically deliverable within 2 to 10 days -
52,95€ In stock
VersiPlug bilge pump for all Kawasaki models
VersiPlug ball-type bilge pump for all Kawasaki models, available in aluminum or black ref. PD1301, PD1300 A plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains stationary, using water pressure. Sold individually.
52,95€In stock -
45,95€ Delivery within 2 to 10 days
Universal duckbill kit + attachment
Universal duckbill kit + attachment ref. 57-4059
45,95€Delivery within 2 to 10 days -
42,95€ Delivery within 2 to 10 days
BLOWSION Dashboard Connection
Connection for jet ski dashboard, from BLOWSION Reference: 04-03-32X
42,95€Delivery within 2 to 10 days -
41,95€ Made to order, theoretically deliverable within 2 to 10 days
Rule 500 GHP 1893L/H bilge pump
Rule 500 standard bilge pump Reference: 25D
41,95€Made to order, theoretically deliverable within 2 to 10 days -
31,95€ Delivery within 2 to 10 days
Replacement valve for RRP flapper
Replacement valve for RRP flapper (RRP-SCU-V) ref. RRP-SCU-V-FLAP
31,95€Delivery within 2 to 10 days -
30,56€ 33,95€ -10% In stock
Bilge pump bracket for SX550, SX650, SX750
Hot Products Bilge Pump Bracket for Kawasaki 550 SX / 650 SX / 750 SX-SXI ref. 57-3024
30,56€ 33,95€ -10%Reduced price!In stock -
26,95€ Made to order, theoretically deliverable within 2 to 10 days
3/4" (19mm) Straight Bilge Pump Outlet
UMI straight bilge pump outlet in black or aluminum for 3/4'' (19mm) hose ref. 57-401X / 04-03-02X / 4850004X
26,95€Made to order, theoretically deliverable within 2 to 10 days -
24,95€ Delivery within 2 to 10 days
-
24,95€ Delivery within 2 to 10 days
Pump for draining water from the bottom of...
Hand pump for draining water from the bottom of the bilge ref. SE450935 Flow rate per cycle: 0.3 L Minimum dimensions: 375 mm Stroke: 280 mm Pipe Ø: 30 mm
24,95€Delivery within 2 to 10 days -
22,95€ Delivery within 2 to 10 days
Safety kit for bilge pump
Safety kit for bilge pump. Waterproof support with 6A fuse and connectors. Ref. 57-3030
22,95€Delivery within 2 to 10 days -
21,95€ Made to order, theoretically deliverable within 2 to 10 days
3/8" (9.5mm) Factory Pipe Water Circuit...
3/8" (9.5mm) Water Circuit Filter for Factory Pipe Pot ref. COMFTG0036
21,95€Made to order, theoretically deliverable within 2 to 10 days -
20,95€ Delivery within 2 to 10 days
45° aluminum water outlet in 3/8" (9.5mm)
UMI 45° aluminum colored squeeze bottle for 3/8" (9.52mm) hose ref. 56-2020
20,95€Delivery within 2 to 10 days -
20,95€ Made to order, theoretically deliverable within 2 to 10 days
Black water outlet at 45° in 3/8" (9.5mm)
UMI 45° black anodized pee valve for 3/8" (9.52mm) hose ref. 56-2022
20,95€Made to order, theoretically deliverable within 2 to 10 days -
20,66€ 22,95€ -10% In stock
1/8" (3.17mm) Straight Bilge Pump Outlet
Hot Products Straight Aluminum Bilge Pump Outlet for 1/8'' (3.17mm) Hose ref. 57-4020 black color and 57-4018 aluminum color
20,66€ 22,95€ -10%Reduced price!In stock -
19,95€ Delivery within 2 to 10 days
Ball Transfer Pump 10L/min
Ball Transfer Pump 10L/min Ref: MT220810
19,95€Delivery within 2 to 10 days -
18,95€ In stock
-
18,66€ 21,95€ -15% In stock
90° wash nozzles in 1/2" (12mm) or 3/8"...
Black or aluminum 90° telltale for 1/2" (12.70mm) and 3/8" (9.52mm) hose A: 3/8" (9.52mm) ref. 56-2010 B: 3/8" (9.52mm) ref. 56-2012 C: 1/2" (12.70mm) ref. 56-3010 D: 1/2" (12.70mm) ref. 56-3012 E: 1/2" (12.70mm) ref. 56-3020
18,66€ 21,95€ -15%Reduced price!In stock -
15,95€ Delivery within 2 to 10 days
45° brass insert for 3/8'' (9.5mm) hose
45° brass insert for 3/8'' (9.5mm) water hose ref. 64-0066
15,95€Delivery within 2 to 10 days -
14,95€ In stock
Kawasaki 800-1500 (03+) Water Drain
WSM brand adaptable water drain for Kawasaki jet skis from 800 to 1500cc and from 2003 onwards References: 011-154
14,95€In stock -
11,95€ In stock
3/8" (9.5mm) plastic Y-connector for water...
3/8" (9.5mm) plastic Y-fitting for water circuit ref. 64-0045
11,95€In stock -
10,95€ Delivery within 2 to 10 days
90° brass insert for 1/2'' (12mm) hose
90° brass insert for 1/2'' (12mm) water hose ref. 64-0009
10,95€Delivery within 2 to 10 days -
8,95€ In stock
90° brass insert for 3/8" (9.5mm) hose
90° brass insert for 3/8" (9.5mm) water hose ref. 64-007
8,95€In stock -
7,95€ Delivery within 2 to 10 days
Straight brass insert for 1/2'' (12mm) hose
Brass insert, straight shape, for 1/2'' (12mm) water hose ref. 64-0005
7,95€Delivery within 2 to 10 days -
6,95€ Delivery within 2 to 10 days
Y plastic for gasoline hose...
Plastic Y for gasoline hose in 1/4'' (6.35mm) x 1/4'' (6.35mm) x 1/4'' (6.35mm) in white color ref. 64-0046
6,95€Delivery within 2 to 10 days -
4,95€ Delivery within 2 to 10 days
Straight brass insert for 3/8'' (9.5mm) hose
Brass insert, straight shape, for 3/8'' (9.5mm) water hose ref. 64-0003
4,95€Delivery within 2 to 10 days -
4,95€ In stock
Plastic tee for water circuit 3/8'' (9.5mm)
Plastic tee for 3/8'' (9.5mm) water circuit ref. 64-0025
4,95€In stock -
4,95€ Delivery within 2 to 10 days
Plastic tee for water circuit 1/2'' (12mm)
Plastic tee for water circuit in 1/2'' (12mm) ref. 64-0027
4,95€Delivery within 2 to 10 days -
3,95€ In stock
Bilge pump hose (19mm) 3/4"
Special bilge pump hose Very flexible, it is sold in 25cm (1") units. We recommend buying this product in pairs to make a length of 50cm which will be suitable in most cases. ref. 57-4008
3,95€In stock -
1,95€ In stock
Plastic Y-fitting for 1/4" x 1/4" x 1/4" hose
Black plastic Y-fitting for 1/4" (6.35mm) x 1/4" (6.35mm) x 1/4" (6.35mm) fuel hose ref. 64-0047
1,95€In stock
