Subcategories
Propellers for all Polaris jet skis: PA-CD-12/18, PA-CD-13/19, PA-CD-15/21, PB-SC-X (see the correspondence table at the bottom of the page)
Professional lifting tool for stand-up jet skis and jet skis (1, 2, 3 seats) & SUVs up to 700kg Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
Holders for 3 fuel cans for jet ski Reference: 52-4911
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
Holders for 2 fuel cans for jet ski Reference: 52-4910
Hydroturf mat for Polaris MSX jet ski ref. HT97 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3780
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
Hood attachment strap set ref. 920723812 / 920723815
IDIARTEC start and stop switch Ref: CSS
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
PROK air filter for 1 jet ski carburetor ref. 006-585
Liquid neoprene adhesive for Hydroturf carpets. Sold in 125ml tubes or 1L tubs. References: BOKM502930 or BOKM502932
NEKEN handlebar with reinforcement bar for sit-down jet ski ref. 060129XX
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
K&N air filter water protection sock (see table below)
Hydroturf lateral footrest to be glued on, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
Instant disassembly connection for garden hose Ref: SC-2900
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
Stainless steel towing ring for saddle jet skis
COVER FOR TAU CETI ROUND AIR FILTER THICKNESS:1.5'' Ref: PF-TCP-01
WSM or SBT adapter (depending on arrival) for air filter for Mikuni 57 mm carburettor for XLT, GP & GPR Ref: 006-667
WSM or SBT (depending on availability) air filter adapter for Mikuni 44 mm carburetor with oil injection Ref: 006-661-01
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
WSM or SBT (depending on availability) air filter adapter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
Tau Ceti Air Filter Cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor without oil injection Ref: 006-660
WSM Air Filter Adapter for Mikuni 38/40mm Carburetor Ref: 006-664
WSM or SBT (depending on availability) air filter adapter for 38mm Mikuni carburetors with oil injection Ref: 006-660-01
Propeller removal tool compatible with WSM or SBT (depending on availability) for original propellers of Yamaha, Kawasaki, Seadoo, Polaris, and Tigershark jet skis.
Side foot wedge 33x5cm ref. TS43
Reinforced handlebar foam for 24.5cm NEKEN tube ref. 0601288X Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green
SOLAS propeller removal tool for Honda, Polaris & Tigershark ref. WR001 and WR006
NEKEN square reinforced handlebar foam ref. 0601XXX Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green Blue Red Black and Orange Black and Yellow Yellow and Black Green and Black Light Blue Fluorescent Orange and White Light Blue and White Red and White Carbon Black / Light Blue Carbon Black / Green Carbon Black / Orange Carbon...
H2O Water Protection Sock for PROK Air Filter ref. 006-580
Water evacuation drain kit for 2-stroke Seadoo, Polaris and Honda jet-skis Ref: A2265
SOLAS propeller tip for Honda, Polaris & Tigershark Reference: SLA010, SL012 and SL009 Reference no longer manufactured: SL006
WSM adaptable water drainage kit for POLARIS / SEA-DOO / YAMAHA jet skis from 580 to 1800cc Reference: 011-158