No products
Hoses and accessories
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Destocking
- E-Foil
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Jet pilot equipment
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
vehiculier
Hoses and accessories
Subcategories
-
226,95€ Delivery within 2 to 10 daysPinch clamp 3/8'' to 5/8'' (9.5-15.8mm)
Pinch collar in kit from 3/8'' (9.5mm) to 5/8" (15.80mm) ref. 18-9125
226,95€Delivery within 2 to 10 days -
202,95€ Made to order, theoretically deliverable within 2 to 10 days
Pinch Collar 5/8'' to 25/32'' (15.7-19.8mm)
Pinch Clamp Kit 5/8'' (15.7mm) to 25/32 (19.8mm) ref. 18-9145
202,95€Made to order, theoretically deliverable within 2 to 10 days -
128,95€ Delivery within 2 to 10 days
Waterproof switch with handlebar mount
WATERPROOF SWITCH UNIVERSAL HANDLEBAR MOUNTING Ref: 57-3006 Universal handlebar mount on/off switch
128,95€Delivery within 2 to 10 days -
76,95€ Delivery within 2 to 10 days
Water restriction box manual adjustment...
Water restriction box with manual adjustment in 3/8'' (9.52mm) Reference: 52-3119
76,95€Delivery within 2 to 10 days -
56,95€ Delivery within 2 to 10 days
Hull pass-through for 3/8'' (9.52mm) hose
Worx hull pass-through for 3/8" (9.52mm) water hose ref. WR06004
56,95€Delivery within 2 to 10 days -
49,95€ Delivery within 2 to 10 days
-
39,95€ Delivery within 2 to 10 days
3/4'' (19mm) water circuit filter
Hot Products water circuit filter in 3/4'''' (19mm) ref. 56-9004
39,95€Delivery within 2 to 10 days -
34,95€ Delivery within 2 to 10 days
Connection for flushing hoses
Instant disassembly connection for garden hose Ref: SC-2900
34,95€Delivery within 2 to 10 days -
21,95€ Made to order, theoretically deliverable within 2 to 10 days
3/8" (9.5mm) Factory Pipe Water Circuit...
3/8" (9.5mm) Water Circuit Filter for Factory Pipe Pot ref. COMFTG0036
21,95€Made to order, theoretically deliverable within 2 to 10 days -
20,95€ Made to order, theoretically deliverable within 2 to 10 days
Black water outlet at 45° in 3/8" (9.5mm)
UMI 45° black anodized pee valve for 3/8" (9.52mm) hose ref. 56-2022
20,95€Made to order, theoretically deliverable within 2 to 10 days -
20,95€ Delivery within 2 to 10 days
45° aluminum water outlet in 3/8" (9.5mm)
UMI 45° aluminum colored squeeze bottle for 3/8" (9.52mm) hose ref. 56-2020
20,95€Delivery within 2 to 10 days -
19,95€ Delivery within 2 to 10 days
Ball Transfer Pump 10L/min
Ball Transfer Pump 10L/min Ref: MT220810
19,95€Delivery within 2 to 10 days -
18,95€ In stock
-
18,66€ 21,95€ -15% In stock
90° wash nozzles in 1/2" (12mm) or 3/8"...
Black or aluminum 90° telltale for 1/2" (12.70mm) and 3/8" (9.52mm) hose A: 3/8" (9.52mm) ref. 56-2010 B: 3/8" (9.52mm) ref. 56-2012 C: 1/2" (12.70mm) ref. 56-3010 D: 1/2" (12.70mm) ref. 56-3012 E: 1/2" (12.70mm) ref. 56-3020
18,66€ 21,95€ -15%Reduced price!In stock -
17,95€ Made to order, theoretically deliverable within 2 to 10 days
Brass T-fitting for 1/4" x 1/4" x 1/4"...
Brass T-fitting for primer or fuel line, 1/4" x 1/4" x 1/4" (6mm) Allows connection of 1/4'''' fuel hoses. Ref. 64-0019
17,95€Made to order, theoretically deliverable within 2 to 10 days -
16,16€ 17,95€ -10% In stock
Stainless steel spiral heat-protectant hose
Stainless steel spiral hose protection against heat, abrasion… Spring length approximately 25cm. Stretchable. Available in diameters: 8mm, 11mm, 25mm and 38mm Reference: 1902-0000 / 1902-0020 / 1902-0030 / 1902-0032
16,16€ 17,95€ -10%Reduced price!In stock -
15,95€ Delivery within 2 to 10 days
Female water connection (B) 3/8'' (9.5mm)...
Female water connector (B) 3/8'''' quick connect (9.52mm) ref. 64-0103
15,95€Delivery within 2 to 10 days -
15,95€ Delivery within 2 to 10 days
45° brass insert for 3/8'' (9.5mm) hose
45° brass insert for 3/8'' (9.5mm) water hose ref. 64-0066
15,95€Delivery within 2 to 10 days -
11,95€ Delivery within 2 to 10 days
Set of 10 pinch clamps 1/2'' (12mm)
Set of 10 pinch clamps for 1/2'' (12.70mm) water hose ref. 59-4018
11,95€Delivery within 2 to 10 days -
11,95€ In stock
-
11,95€ In stock
3/8" (9.5mm) plastic Y-connector for water...
3/8" (9.5mm) plastic Y-fitting for water circuit ref. 64-0045
11,95€In stock -
10,95€ Delivery within 2 to 10 days
90° brass insert for 1/2'' (12mm) hose
90° brass insert for 1/2'' (12mm) water hose ref. 64-0009
10,95€Delivery within 2 to 10 days -
10,95€ In stock
Pack of 10 quick release fasteners
Set of 10 quick-release fasteners Designation: 28 mm x 28 mm self-adhesive For fasteners with widths up to 4.8 mm Cdt: Blister of 10 ref. 000158
10,95€In stock -
8,95€ Delivery within 2 to 10 days
Brass tee for 1/8'' x 1/8'' x 1/8'' hose
Brass tee for primer or hose in 1/8'' (3mm) x 1/8'' (3mm) x 1/8'' (3mm) ref. 64-0015 Allows 2 carburettors to be connected to the primer pump
8,95€Delivery within 2 to 10 days -
8,95€ Delivery within 2 to 10 days
-
8,95€ Delivery within 2 to 10 days
Pack of 10 clamps to pinch 3/8'' (9.52mm)
Lot of 10 clamps to pinch for water hose in 3/8'' (9.52mm) ref. 59-4017
8,95€Delivery within 2 to 10 days -
8,95€ In stock
90° brass insert for 3/8" (9.5mm) hose
90° brass insert for 3/8" (9.5mm) water hose ref. 64-007
8,95€In stock -
8,95€ Delivery within 2 to 10 days
Pack of 10 clamps to pinch 1/4'' (6.35mm)
Lot of 10 clamps to pinch for fuel hose in 1/4'' (6.35mm) ref. 59-4016
8,95€Delivery within 2 to 10 days -
7,95€ Delivery within 2 to 10 days
Straight brass insert for 1/2'' (12mm) hose
Brass insert, straight shape, for 1/2'' (12mm) water hose ref. 64-0005
7,95€Delivery within 2 to 10 days -
7,95€ Delivery within 2 to 10 days
Brass insert 90° gasoline hose 1/4'' (6mm)
90° brass insert for 1/4'' (6mm) fuel hose ref. 64-0010
7,95€Delivery within 2 to 10 days -
7,95€ In stock
-
6,95€ Delivery within 2 to 10 days
Y plastic for gasoline hose...
Plastic Y for gasoline hose in 1/4'' (6.35mm) x 1/4'' (6.35mm) x 1/4'' (6.35mm) in white color ref. 64-0046
6,95€Delivery within 2 to 10 days -
5,95€ In stock
Reinforced water hose 1/2'' blue (12.70mm)
Reinforced water hose 1/2'' blue (12.70mm), sold in 30cm lengths ref. 56-8004 Sold in a single length, example 3 units = a continuous length of 3X30cm or a single piece of 0.90 cm
5,95€In stock -
5,95€ Delivery within 2 to 10 days
3/8'' (9.5mm) water hose connection
3/8'' (9.5mm) water hose connector ref. 64-0058
5,95€Delivery within 2 to 10 days -
5,95€ Delivery within 2 to 10 days
Brass T for primer in 1/4 x 1/4 x 1/8
Brass tee for primer or fuel hose in 1/4'' (6mm) x 1/4'' (6mm) x 1/8'' (3mm) Reference: 64-0017
5,95€Delivery within 2 to 10 days -
4,95€ In stock
Reinforced 3/8" (9.52mm) water hose
Reinforced colored water hose, Blowsion brand, 3/8" (9.52mm) ref. 01-07-031 / 01-07-032 / 01-07-033 / 01-07-034 / 01-07-036 / 01-07-037 Available colours: Red, Orange, Green, Blue, Yellow and Translucent Black Sold in 30cm lengths. The quantity corresponds to the length you want (for example, a quantity of 5 corresponds to 1.5m). Inner diameter 10mm -...
4,95€In stock -
4,95€ Delivery within 2 to 10 days
Plastic tee for water circuit 1/2'' (12mm)
Plastic tee for water circuit in 1/2'' (12mm) ref. 64-0027
4,95€Delivery within 2 to 10 days -
4,95€ In stock
Plastic tee for water circuit 3/8'' (9.5mm)
Plastic tee for 3/8'' (9.5mm) water circuit ref. 64-0025
4,95€In stock -
4,95€ Delivery within 2 to 10 days
Straight brass insert for 3/8'' (9.5mm) hose
Brass insert, straight shape, for 3/8'' (9.5mm) water hose ref. 64-0003
4,95€Delivery within 2 to 10 days -
4,95€ In stock
Reinforced 3/8" blue (9.52mm) water hose
Water hose for jet ski, in reinforced version 3/8'' blue (9.52mm), Sold in 30 cm lengths. Reference: 56-8000
4,95€In stock -
3,95€ In stock
Bilge pump hose (19mm) 3/4"
Special bilge pump hose Very flexible, it is sold in 25cm (1") units. We recommend buying this product in pairs to make a length of 50cm which will be suitable in most cases. ref. 57-4008
3,95€In stock -
3,95€ Delivery within 2 to 10 days
Straight brass insert for 1/4'' (6mm) fuel...
Brass insert, straight shape, for 1/4'' (6mm) fuel hose ref. 64-0001
3,95€Delivery within 2 to 10 days -
3,95€ In stock
Reinforced 1/4" (6.35mm) fuel hose
Reinforced BLOWSION brand special fuel hose in 1/4" (6.35mm) ref. 01-07-021 / 01-07-022 / 01-07-023 / 01-07-024 / 01-07-026 / 01-07-027 / 97L116G Available colours: Red, Orange, Green, Blue, Yellow and Translucent Black Sold in 30cm lengths. The quantity corresponds to the length you want (for example, a quantity of 5 corresponds to 1.5m). Diam. inter...
3,95€In stock -
3,95€ In stock
Reinforced primer hose 1/8" (3.17mm)
Reinforced primer fuel line, Blowsion brand, 1/8" (3.17mm) ref. 01-07-011 / 01-07-012 / 01-07-013 / 01-07-014 / 01-07-015 / 01-07-017 Available colours: Red, Orange, Green, Blue, Yellow and Translucent Black Sold in 30cm lengths. The quantity corresponds to the length you want (for example, a quantity of 5 corresponds to 1.5m).
3,95€In stock -
2,95€ In stock
Stainless steel screw collar from 16 to 25mm
Stainless steel screw collar from 16 to 25mm ref. CAVI16/25MM
2,95€In stock -
2,95€ In stock
Stainless steel screw collar from 50 to 70mm
Stainless steel screw collar from 50 to 70mm ref. CAVI50/70MM
2,95€In stock -
1,95€ In stock
Plastic Y-fitting for 1/4" x 1/4" x 1/4" hose
Black plastic Y-fitting for 1/4" (6.35mm) x 1/4" (6.35mm) x 1/4" (6.35mm) fuel hose ref. 64-0047
1,95€In stock -
1,95€ In stock
Stainless steel screw clamp, 8 to 16mm
Stainless steel screw clamp, 8 to 16mm ref. CAVI8/16MM
1,95€In stock -
0,95€ In stock
1/4" (6.35mm) transparent water hose
1/4" (6.35mm) transparent PVC hose for water circuits ref. 891016 Sold in 30cm lengths. The quantity corresponds to the length you want (for example, a quantity of 5 corresponds to 1.5m).
0,95€In stock
