Subcategories
Yamaha 701 CDI MSD Enhancer ref. 4253
Exhaust elbow for Factory type B muffler ref. COMCST0040
148mm stainless steel propeller body for mounting with the 148mm Solas stator Reference: YRS-HS-148
Solas stainless steel propeller body 144mm for Yamaha GP 800 (98-00), XL 800 (98-99), GP 760 (97-00), Wave raider 760 (96), Wave Radier 700 (94-97), Wave deluxe 700 (94-97), Wave Venture 700 (94-97), Wave Blaster 700 (93-97), Wave Runner 700 (93-97), VXR Pro 700 (93-97), Superjet 700 (94- 16) Reference: YBS-HS-144
WORX hull plate for Wave Blaster 1 and 2 Ref: WR301 The hull plate provides stability and speed and improves grip when turning.
WORX hull plate for Kawasaki SX750 / SXI 750 Ref: WR303 The hull plate provides stability and speed and improves cornering grip.
WORX fairing plate for Kawasaki SX 750 / SXI 750 Ref: WR307 The hull plate provides stability and speed and improves grip when turning.
IDIARTEC reinforced steering axle for Yamaha Blaster 1 jet-ski Reference: IDT-ADYB1
WORX fairing plate for Kawasaki SXI PRO 750 Ref: WR306 The hull plate provides stability and speed and improves grip when turning.
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13 /19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X ( 15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD-CD-14/20, Y D-SC-X0 (14.5-17.5 ), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD- SC-I...
SHOVEL BEAKER WORX YAMAHA SJ/BLASTER 90-07 Ref: WR201
WORX SJ/BLASTER SHOVEL BEAKER AFTER 08 Ref: WR205
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
High performance air filter kit from RIVA Racing for Yamaha Superjet 2-stroke hand jet from 1990 to 2020 and Yamaha Waveblaster jet ski from 1994 to 1997 Reference: RY1301-KIT-1
MSD IGNITION COIL FOR 2 CYLINDERS 2T ref. 4294
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Pump Shoe aluminum 155mm Rick Roy Reference: PM-SH-AL-155 This part is made of lightweight aluminum from RRP. It mounts on Rickter, Superjet, Blaster and any other hull using a 155mm Yamaha pump. It can be rebored to 160mm and more
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf saddle cover for Y amaha jet ski Blaster 2 Reference: SEW741
Hydroturf seat cover for Yamaha Blaster 800 jet ski Reference: SEW742
Sponsors from Worx Racing for Yamaha brand jet-ski, WaveBlaster model from 1993 to 1997 Reference: WR546
MSD ignition support for Yamaha Ref: 01-04-419
PROX piston kit (piston + segments + pin + circlips) for Yamaha GP800R and 1200R jet-ski with valve ref. 01.2518.X
Hydroturf carpet for Yamaha WAVE BLASTER 2 jet ski ref. HT741 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Hydroturf mat for Yamaha WAVE BLASTER 800 jet ski ref. HT742 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
PROX piston kit (piston + segments + pin + circlips) for Yamaha 760cc and 1200 non-valved jet-ski ref. 01.2514.X
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
PROX piston kit (piston + segments + pin + circlips) for Yamaha 700cc jet-ski ref. 01.2510.X
Pump Shoe plastic 144mm Rick Roy Reference: PM-SH-PLAS-144 This part is made of lightweight plastic from RRP. It mounts on Rickter, Superjet, Blaster and any other hull using a 144mm Yamaha pump.
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Blowsion Aluminum blowsion tank cap for YAMAHA Ref: 04-03-15X
RRP transmission coupler for all Rickter and Yamaha except 66M/66E/66V Reference: RRP-EG-CPL
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
ADA TRANSMISSION COUPLER FOR YAMAHA 650/700/760 Ref: 34-700190
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
SOLAS shovel scoop for Yamaha Wave Blaster 700 (93-97) / Superjet 700 (94 and +) Ref: YB-IG-B
BOYESEN YAM 701 (62T) VALVES Ref: 026
IDIARTEC start and stop switch Ref: CSS
Boyesen Yamaha 701 (61X) Fiber Valves ref. 024
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
FACTORY PIPE ANGLED MUFFLER HOSE BLASTER MOD Ref: COMHOS0130
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Air Filter TAU-CETI TORNADO Series 2.5'' (6.35cm) 6 colors to choose from: Ref: 53-4274-WHT (White) Ref: 53-4274-BLK (Black) Ref: 53-4274-RED (Red) Ref: 53-4274-BLU (Blue) Ref: 53-4274-GREEN (Green) Ref: 53-4274-SLV (Alu)
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX