Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
IDIARTEC Fixed or Shock Absorbed Column for Sea-doo jet ski in Aluminum or Black version depending on size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT Column
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref.: 01.5594.XX
Supports for 2 fuel cans for jet ski Reference: 52-4910
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
WORX Racing Exhaust System for Seadoo 4tec Watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
Maptuner diagnostic extension harness for Seadoo BRP watercraft Reference: 01-MT067
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored in the water permanently.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced stainless steel washers for Sea-doo hull: Reference: RS4-120-WUK
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
VersiPlug ball bilge pump for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
VersiPlug ball bilge drain for Seadoo from 2010 and up, aluminum or black color ref. PD1420, PD1421 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Instant disassembly connection for garden hose Ref: SC-2900
WSM Adapter for Engine Alignment Tool for Seadoo 185 & 215 Watercraft Ref. : 950-150
Alignment Tool Adapter from WSM for Seadoo 580 / 720 / 951 watercraft from 1992 to 2003 Ref. : 950-145 OEM: 529035590
Stainless steel towing ring for saddle jet ski
PAD (Protective Foam) for Handlebar with RIVA Racing Reinforcement Ref: PAD01-235
ODI handle adapter/extension kit for Seadoo brand watercraft, all models from 2002 to 2025 (except Spark 2016+ & RXT/GTX 2018+) Reference: L72SDRX14
21mm Reinforced Screw, from EASY RIDER for All Seadoo 4-stroke Flywheels Reference: RS-4320
23mm Reinforced Screw, from EASY RIDER for racing flywheel, mounts on Seadoo 4-stroke watercraft Reference: RS-4321
Skat Trak Super Slim Line propeller rubber for SEADOO ref. RIMPNOSEBOOTSDSSL
Steering Cable Extension (+2cm) from EASY RIDER for Magnum Pump Set-Back Easy Rider Ref. : RS-4927