Subcategories
WORX Racing Exhaust System for Seadoo 4tec Watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
Original OEM Cylinder Head Gasket in 1630cc from EASY RIDER in 5 blades for Seadoo 300 watercraft Piston dimension in 100mm (not supplied) Reference: RS-3053
Original OEM Turbine Shaft offered by EASY RIDER with nuts for Seadoo 4-stroke watercraft Reference: RS-4930
Aluminum washers from EASY RIDER for Seadoo RXP Reference: RS-4958
Cylinder head gasket from EASY RIDER 4 blade version for Seadoo watercraft Reference: RS-950770
Lower racing assembly from ESAY RIDER with ball bearing for Seadoo watercraft Reference: RS-6013
EASY RIDER Circlip Reinforcement in 30mm for Seadoo Watercraft Reference: RS-5130
Worx brand start/stop switch for Seadoo Ref: WR06015
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Crankshaft pads or bearing shells, RACING version, offered by EASY RIDER, mounts on 1500 / 1630 / 1730cc Compressed for Seadoo Watercraft Reference: RS-4122
Circlip reinforcement from EASY RIDER in 25mm for Seadoo watercraft Reference: RS-5125
Circlip reinforcement from EASY RIDER in 27mm for Seadoo watercraft Reference: RS-5127
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Riva Pro Bar 32" Handlebar Reference: RY204BK-BAR-2
RIVA Air Vent Kit for Seadoo RXP-X 260 / 300 Watercraft Ref: RS-14-189K
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Air filter distributed by ESAY RIDER and brand K&N, mounts on the RS-3300 kit for Seadoo 300 watercraft Reference: RS-3301
Connecting rod pads or bearing shells, RACING version, offered by EASY RIDER, mounts on 1500 / 1630 / 1730cc Compressed for Seadoo Watercraft Reference: RS-4123
Distribution chain or camshaft chain, offered by EASY RIDER, mounts on 1500 / 1630 / 1730cc for Seadoo watercraft Reference: RS-4124
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Original OEM crankshaft position sensor offered by EASY RIDER for Seadoo 1630 watercraft Reference: RS-5724
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Maptuner Nano recording cable from RIVA Racing for Seadoo watercraft Reference: 01-MT062
IDIARTEC start and stop switch Ref: CSS
Suction Port Adapter and Amplifier from RIVA Racing for Seadoo 230 and 300 watercraft Reference: RS12050-VPA
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Directional Nozzle from Easy Rider in diameter 85mm, for Seadoo 300 watercraft Reference: RS-4985
Ring for Directional Nozzle from Easy Rider in diameter 87mm, for Seadoo 300 watercraft Reference: RS-4987
Ring for Directional Nozzle from Easy Rider in diameter 86mm, for Seadoo 300 watercraft Reference: RS-4986
Ring for Directional Nozzle from Easy Rider in diameter 88mm, for Seadoo 300 watercraft Reference: RS-4988
Ring for Directional Nozzle from Easy Rider in diameter 84mm, for Seadoo 300 watercraft Reference: RS-4984
Ring for Directional Nozzle from Easy Rider in diameter 83mm, for Seadoo 300 watercraft Reference: RS-4983
Ring for Directional Nozzle from Easy Rider in diameter 82mm, for Seadoo 300 watercraft Reference: RS-4982
Ring for Directional Nozzle from Easy Rider in diameter 80 mm for Seadoo 1630 watercraft Reference: RS-4980A
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
Starter relay offered by EASY RIDER for Seadoo 4-stroke watercraft from 2005 and more Reference: RS-5505
Column riser for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Maptuner diagnostic extension harness for Seadoo BRP watercraft Reference: 01-MT067
RIVA RACING Air Filter Breather Hose for Seadoo 300 Watercraft Reference: RS19050-PFBH
Handlebar extension for Seadoo watercraft or jet ski: - RXT 325 - RXP all models - Spark (14-15) - GTX/RXT (02-17) - GTI (06-19) Reference: RS24100-BES-1
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored permanently in the water.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced stainless steel washers for Sea-doo hull: Reference: RS4-120-WUK
Original OEM ignition coil by ESAY RIDER for Seadoo 1630 watercraft Reference: RS-4207
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tubes or 1L jars. References: BOKM502930 or BOKM502932
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
VersiPlug ball-type bilge drain for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.