Inclined extension for Seadoo GTI / GTR 215 (12+) Inclined column riser for SEADOO GTI /GTR; allows you to straighten the position of the 1/2 handlebar support. AFTER 2012 REF: RIS
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
Compressor ring repair kit adaptable to WSM or SBT (Depending on availability) for Seadoo Jet-ski 185 / 215 / 255 / 260
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Bonnet attachment strap set ref. 920723812 / 920723815
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet skis Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
RIVA Locking Key for Seadoo 185 / 215 / 255 / 260 Compressor from 2003 to 2016 Ref.: RS1750-ISH-949
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Suction Port Adapter and Amplifier from RIVA Racing for Seadoo 230 and 300 watercraft Reference: RS12050-VPA
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
EASY RIDER 95lbs Fuel Injector Adapter with Aluminum Spacer for Seadoo Watercraft Ref: RS-5560
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Column extension for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
Lightweight 23mm diameter piston pin from EASY RIDER for Seadoo watercraft Sold individually Ref: RS-3059
Maptuner diagnostic extension harness for Seadoo BRP watercraft Reference: 01-MT067
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
WSM Service Tool Kit for Seadoo Compressor 16 Teeth Ref. 950-110K
Cylinder head screw or set of cylinder head bolts, version equivalent to the original from EASY RIDER, mounts on 1500 / 1630 / 1730cc for Seadoo watercraft Reference: RS-4126
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored in the water permanently.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced stainless steel washers for Sea-doo hull: Reference: RS4-120-WUK
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
LISLE . SUPPORT PLATE . SUPPORT PLATE (sea-doo for compressor) SEADOO COMPRESSOR TOOL TO SHIFT YOUR COMPRESSOR BEFORE DISASSEMBLY 529035947
Connection Kit for Seadoo 1600 Coil from EASY RIDER Ref: RS-5562
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
VersiPlug ball bilge pump for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
RIVA Racing Clutch Washer Kit for Seadoo 215 / 255 / 260 Watercraft Reference: RS17050-SWP-948
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Seadoo Female Torx Bit Set Ref: LS26750
VersiPlug ball bilge drain for Seadoo from 2010 and up, aluminum or black color ref. PD1420, PD1421 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Riva Sea-Doo 255/215 Blow-off Valve Kit SKU: RS1750-BVBO
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
RIVA Maptuner connection cable for Seadoo jet ski (all models) (including only the connection cable from the Maptuner box to the ECU) ref. 01-MT013
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX