Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
- For Seadoo 4-stroke watercraft with a 900 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
- For Seadoo 2-stroke 782cc watercraft: (see the correspondence table at the bottom of the page)
- For Seadoo 2-stroke 720cc watercraft: (see the correspondence table at the bottom of the page)
- For Seadoo 2-stroke watercraft for 951cc engine: (see the correspondence table at the bottom of the page)
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
- For Seadoo 2-stroke 650cc watercraft: (see the correspondence table at the bottom of the page)
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
Scoop from Worx Racing for Seadoo brand watercraft, GTI/GTS/GTX & HX model from 1992 to 1997 Reference: WR206
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Supports for 2 fuel cans for jet ski Reference: 52-4910
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Stainless steel wear ring 155mm Solas for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
SOLAS shovel scoop for: - XP 782 (95-96) / XP 720 (95) / XP 650 (91-94) - SPX 782 (97-98) / SPX 720 (96-97) / SPX 650 (93-95) / SPI 650 (93-96) / SP 650 (88-96) - GS 720 (97) / GSI 720 (97-98) / GSX 650 (92-95) - GTI 720 (96-97) / GTS 720 (97-00) / GTX 650 (92-95) / GTS 650 (92-96) / GT 650 (90-91) - HX720 (95) Ref: SD-IG-B
SOLAS shovel scoop for: - RX 951 (00-03) / RX DI 951 (00-03) / RXX 951 (01-02) - XP 720 782 (97-98) / XP 951 (00-04) / XP DI 951 (00-04) / XP ltd 951 (98-99) - GTI 720 (01-05) / GTI LE 720 720 (01-05) / GTI RFI 720 (01-05) / GTS 720 (01-02) Ref: XP-IG-B
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
WORX Racing exhaust system for Seadoo 4 tec watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
Hydroturf mat for Seadoo GTS (01)/ GTI (01-05) watercraft ref. HT823 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Hydroturf mat for Seadoo GTI and GTI SE 130 (11-18) watercraft, GTI SE & Ltd. 155, GTS 130, GTR 215 (12-19), Wake 155 ref. HT884 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Seadoo GT family (90-95)/ GTI (96)/ GTS (96-00) watercraft ref. HT82 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Bonnet attachment strap set ref. 920723812 / 920723815
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Lightened Timing Chain Sprocket from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet-ski Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Universal wheel puller for 2-stroke jet ski References: 003-322 / 80-104
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX