Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Supports for 2 fuel cans for jet ski Reference: 52-4910
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Stainless steel wear ring 155mm Solas for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
Hydroturf mat for seadoo GTX DI (02-03), GTX 4-tec (02-05), GTX (03-08), RXT & RXT-X (2009 and before) watercraft Ref. HT88 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
Spacer between Original Kawasaki STX 15F Jetski Plate and Idiartec Column Reference: EK-50/15F
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
OPAS RIVA COMPETITION SEA DOO RXP /RXT / GTX (2003+) 215/255 CONDEMNATION KIT References: RS29050-1
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Bonnet attachment strap set ref. 920723812 / 920723815
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
ODI reinforced handlebar for saddle jet Reference: 06013082
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Worx brand start/stop switch for Seadoo Ref: WR06015
Lightened Timing Chain Sprocket from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Seadoo floating ring tool (tool to remove the carbon ring from its stainless steel support) Drive Shaft / Floating Ring Ref. 950-100 / 950-102
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet-ski Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Ring for Esay Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref. : RS-4981
Column wedge for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
IDIARTEC column wedge for Yamaha Jet-ski in +25 or +50mm Reference: EY-25 and EY-50
Column extension for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Handlebar with NEKEN reinforcement bar for saddle jet ref. 060129XX
Exhaust Valve from PRO-X for Seadoo 4-stroke Watercraft 1500cc all models ref. : 28.5594-1
PUSHER BALL BEARING RING. SHAFT PUSHER (sea-doo 4-tec) ref. 950-170
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
34, 38, 40, 43, 44, 49, 50, 54, 56, 58, 63 and 65 mm Bearing Thrust Tool Kit for Jet Ski ref. PPBD-2481
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Toothed Crown Locking Tool for Seadoo 800 / 951 DI watercraft from 1998 to 2003 References: 950-175
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
PUSHER BALL BEARING RING. SEAL & BEARING PUSHER (sea-doo 4-tec) ref. 950-165
Impact Screwdriver Kit: 12 Pieces for jet ski ref. : 990-210
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX