Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
Supports for 3 jet ski fuel cans Reference: 52-4911
RIVA Racing gear release box for Seadoo 255 / 260 / 300 watercraft (from 2011 to 2015) Ref: RS11090-SCOM-11
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Riva speed control box for Seadoo 260 and 300 2016 and 2017 Ref: RS11090-SCOM-16
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref. : 01.5594.XX
RIVA Racing reinforcement for Seadoo 215, 255, 260 and 300 watercraft intake manifold Ref: RS12050-IMG
WISECO piston for seadoo side 100.50mm ref. : 40038M10050
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Riva free exhaust kit for seadoo all S3 and T3, including RXT-X 260, IS, AS and RXP-X 260 Reference: RS16090
WISECO piston for seadoo coast 101.00mm ref. : 40038M10100
RIVA INTAKE PIPE MODIFICATION KIT FOR SEADOO 255 / 260 Ref: RS12080-IMUK
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Ring set for 130mm Forged Piston for 1730cc engine from EASY RIDER for Seadoo Watercraft Sold individually and for the RS-3056 piston kit Reference: RS-3057
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 159mm Solas for seadoo 215 / 255 / 260 Ref: SRX-HS-159-02
Supports for 2 fuel cans for jet ski Reference: 52-4910
Original OEM Fuel Injector provided by EASY RIDER for Seadoo 1630 watercraft Reference: RS-5558
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
3M pre-glued Hydroturf mat for Seadoo RXT 260 IS & AS (09-16), GTX S 155 & 260 (12-16), GTX ltd IS (09-17) watercraft ref. HT882-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Ring Kit for Forged Piston in 100mm (99.93mm) from EASY RIDER for Seadoo Watercraft Sold individually Ref: RS-3062
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT-X/GTX-SC/RXP-X 08 (255HP) Ref: RS1751-HDW-948
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Adapter kit for engine alignment tools from the SBT brand for Seadoo IS jet ski References: 80-103iS-01K
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
ODI reinforced handlebar for saddle jet Reference: 06013082
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Compressor tool 16 teeth (SD 215) Ref: 613-96016