Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
IDIARTEC Fixed or Shock Absorbed Column for Sea-doo jet ski in Aluminum or Black version depending on size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT Column
156mm Solas stainless steel wear ring for seadoo 130 / 155 / 185 Ref: SRX-HS-159-01
Supports for 2 fuel cans for jet ski Reference: 52-4910
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref.: 01.5594.XX
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
155mm Solas stainless steel wear ring for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
Worx brand start/stop switch for Seadoo Ref: WR06015
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Hydroturf Mat for Seadoo GTI 4-Tec (06-10), GTI and GTI SE 130/155, Wake 155 (09-10) watercraft ref. HT824 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Bonnet attachment strap set ref. 920723812 / 920723815
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet skis Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
IDIARTEC start and stop switch Ref: CSS
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Column extension for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
WORX DESS Key Switch Bracket for Seadoo Ref: WR06025
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored in the water permanently.
Duckbill for Seadoo watercraft (before 2009) and Yamaha 1.8L jet ski Reference: RS8100 or A2025
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
VersiPlug ball bilge pump for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
Seadoo Female Torx Bit Set Ref: LS26750
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX