Subcategories
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
WORX brand electronic throttle lever for Seadoo 4-stroke Ref: WR06010
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
IDIARTEC Fixed or Cushioned Column for Sea-doo jet ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT Column
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref.: 01.5594.XX
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
WORX brand IBR control lever for Seadoo 4-stroke Ref: WR06011
155mm Solas stainless steel wear ring for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
Supports for 2 fuel cans for jet ski Reference: 52-4910
Hydroturf Mat for Seadoo GTI and GTI SE 130 (11-18), GTI SE & Ltd. 155, GTS 130, GTR 215 (12-19), Wake 155 ref. HT884 All Hydroturf products are custom-made and individually manufactured. They require a minimum manufacturing time of 15 business days. They cannot be returned or exchanged.
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Sloped riser for Seadoo GTI / GTR 215 (12+) Inclined column riser for SEADOO GTI / GTR; allows you to straighten the position of the 1/2 handlebar support. AFTER 2012 REF: RIS
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet skis Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Hood attachment strap set ref. 920723812 / 920723815
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
IDIARTEC start and stop switch Ref: CSS
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
Column riser for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
WORX DESS Key Switch Bracket for Seadoo Ref: WR06025
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
Handlebar extension for Seadoo watercraft or jet ski: - RXT 325 - RXP all models - Spark (14-15) - GTX/RXT (02-17) - GTI (06-19) Reference: RS24100-BES-1
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
VersiPlug ball-type bilge drain for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.