Subcategories
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
3M Pre-Glued Hydroturf Mat for Seadoo RXT 260 IS & AS (09-16), GTX S 155 & 260 (12-16), GTX ltd IS (09-17) Watercraft ref. HT882-PSA All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Adapter kit for engine alignment tools from the SBT brand for Seadoo IS jet ski References: 80-103iS-01K
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Worx brand start/stop switch for Seadoo Ref: WR06015
ODI reinforced handlebar for saddle jet Reference: 06013082
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
EASY RIDER Lightweight Timing Chain Sprocket for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
RIVA Locking Key for Seadoo Compressor 185 / 215 / 255 / 260 from 2003 to 2016 Ref.: RS1750-ISH-949
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Easy Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref.: RS-4981
EASY RIDER 95lbs Fuel Injector Adapter with Aluminum Spacer for Seadoo Watercraft Ref: RS-5560
Column riser for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
Lightweight 23mm diameter piston pin from EASY RIDER for Seadoo watercraft Sold individually Ref: RS-3059
Seadoo floating ring tool (tool for removing the carbon ring from its stainless steel support) Drive Shaft / Floating Ring Ref. 950-100 / 950-102
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
WSM Service Tool Kit for Seadoo Compressor 16 Teeth Ref. 950-110K
Riva air filter for Riva kit for RS13050 kit Reference: RS13050-3
Cylinder head screws or set of cylinder head bolts, equivalent version to the original from EASY RIDER, fits 1500 / 1630 / 1730cc for Seadoo watercraft Reference: RS-4126
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and up Ref: RS81090 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored permanently in the water.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Screw-on duckbill for Seadoo 2009 and up (sold individually) Ref: A7026
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
VersiPlug ball-type bilge drain for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
VersiPlug ball-type bilge drain for Seadoo from 2010 and up, in aluminum or black ref. PD1420, PD1421 Plastic ball system allows the bilge to be emptied while sailing and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Instant disassembly connection for garden hose Ref: SC-2900
WSM Adapter for Engine Alignment Tool for Seadoo 185 & 215 Watercraft Ref. : 950-150
Alignment Tool Adapter from WSM for Seadoo 580 / 720 / 951 watercraft from 1992 to 2003 Ref. : 950-145 OEM: 529035590
Gear Holding Tool for Seadoo Compressor in 16 teeth Ref. : 950-110-16
Stainless steel towing ring for saddle jet skis
PAD (Protective Foam) for Handlebar with RIVA Racing Reinforcement Ref: PAD01-235
ODI handle adapter/extension kit for Seadoo brand watercraft, all models from 2002 to 2025 (except Spark 2016+ & RXT/GTX 2018+) Reference: L72SDRX14
21mm Reinforced Screw, from EASY RIDER for All Seadoo 4-stroke Flywheels Reference: RS-4320