Subcategories
EASY RIDER Carter Screw Kit for Seadoo All 4-stroke Models (1500cc, 1600cc, 1630cc and 1700cc) except Seadoo Spark Ref: RS-4265
Set of 2 Reinforced Rear Engine Mounts EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4268
EASY RIDER Titanium Valve Cup Kit for Seadoo 4-stroke watercraft all models. Ref: RS-4214
Hydroturf mat PRO SERIES version for Seadoo GTI 130 /GTI LTD 155 /GTI SE 130 /GTI SE 155 /GTS RENTAL 130 /WAKE 155 watercraft (20-23) Reference: PR889 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
- For Seadoo 4-stroke watercraft with a 1630 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
Reinforced cylinder head studs from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4260A
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
WORX SEADOO GTI, GTS and GTR SHOVEL CAP 2012+ Reference: WR243
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Oil Vapor Tank and RIVA Breather Kit for Seadoo RXP 215, RXT 215, RXP-X 255, RXT-X 255, GTX 4 tec, RXP-X 260 watercraft, all models of RXT & GTX unsuspended, RXP-X 300, RXT-X 300, GTX Ltd 300, RXT 230, GTX 155, GTR 230, GTR-X 230 Reference: RS19050-BCC-6
WORX brand electronic throttle lever for Seadoo 4 stroke Ref: WR06010
Riva Racing electronic throttle trigger for Seadoo jet-ski ref. : RS2406010
RIVA RACING Empty Right Switch for Seadoo RXP and GTR watercraft from 2012 to 2017 ref. : RS2406012
RIVA RACING Left Empty Switch for Seadoo RXP and GTR Watercraft from 2012 to 2017 ref. : RS2406013
RIVA Racing free exhaust kit model 2020 and above for Seadoo RXT / GTX / GTI / RXP / GTR watercraft Reference: RS16121
Wideband air and fuel sensor module from PLX for Maptuner from RIVA Racing Reference: 897346002726
WORX brand IBR control lever for Seadoo 4 stroke Ref: WR06011
161mm stainless steel wear ring from RIVA Racing for seadoo GTR 230 and RXT 300, RXP 300, GTX 300 watercraft Ref: RS33-161-SRX
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref. : 01.5594.XX
AQUA SPORT PERFORMANCE Anodized Water Pump Cover for Seadoo 1500 watercraft ref. : SD-16007B (black) / SD-16007R (red)
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Solas stainless steel wear ring 161mm for seadoo GTR 230 and RXT 300, RXP 300, GTX 300 Ref: SX-HS-161
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Original Seadoo bilge pump kit for Sea-doo watercraft - RXT / GTX / Wake Pro from 2018 and above - Fish Pro from 2019 and up - GTI / GTI SE / GTR from 2020 and more - RXP-X from 2021 and up Reference: 295100739
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Supports for 2 fuel cans for jet ski Reference: 52-4910
Original OEM Fuel Injector provided by EASY RIDER for Seadoo 1630 watercraft Reference: RS-5558
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
RIVA Racing free exhaust kit for Seadoo GTR 230 and GTR-X 230 watercraft Ref: RS16160
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Hydroturf mat for Seadoo GTI / GTI SE 130, 170 / Wake 170 / GTR 230 watercraft from 2020 and up Reference: HT889 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
WORX Racing exhaust system for Seadoo 4 tec watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
ODI reinforced handlebar for saddle jet Reference: 06013082
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343