Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke jet skis: (see the table of correspondences at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high-quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the table of correspondences at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high-quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
3 bar (29.7 PSI) pressure regulator housing from RIVA Racing for Yamaha SHO and FZR / FZS jet skis from 2008 to 2010 Ref: RY11740-MS-3
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
WSM air filter (direct replacement for the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS As a replacement for the original part number 6S5-E4451-00-00 ref. 006-590
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3780
High-performance air filter from Riva Racing, original size, for Yamaha HO / SHO / SVHO jet skis Reference: RY13040-OE-2
RIVA Racing Pro bar handlebar with reinforcement and protective foam, 30" (76cm) Ref: RY205BK-BAR-2
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
WORX Racing 2° Angled Turbine Bracket for Yamaha 1800 Jet Ski Ref: WR05004
7.48mm Valve Shim Kit for Yamaha 4-stroke Jet Skis from HOT CAMS Reference: HCSHIM01
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
ODI reinforced handlebars for sit-down jet skis Reference: 06013082
Hydroturf mat for Yamaha FZR/FZS jet skis from 2008 to 2016 and FX HO, FX HO Cruiser, FX SHO and FX SHO Cruiser from 2008 to 2011 Reference: HTFX1 All Hydroturf products are custom-made and individually produced. They require a minimum manufacturing time of 15 business days. They are non-returnable and non-exchangeable.
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
RIVA Racing high-volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
Original workshop manual for Yamaha jet skis, printed format, for models FZR & FZS from 2015 and 2016 Reference: LIT-18616-03-55
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Original workshop manual in paper format for Yamaha jet skis, model FZR / FZS from 2009 to 2013 Reference: LIT-18616-03-18
Anti-cavitation kit for Worx WR245 scoop for Yamaha FZR / FZS (SVHO) from 2014 and up Ref: WR0706
WORX anti-cavitation kit for for FZR / FZS (09-13) ref. WR0701
Reinforced Throttle Body Support from RIVA Racing for Yamaha 1800cc jet skis from 2008 to 2017 Reference: RY13040-BTA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Anti cavitation turbine kit for Yamaha FZR / FZS (2014 and +) with scoop RIVA RY22051 Ref: RY25051 This kit allows to plug this mega'tron on the scoop and the water inlet.
RIVA Racing Pro bar 29" (73cm) handlebar with reinforcement and protective foam Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
Yamaha 1.8 Compressed Freewheel Retaining Tool for Bearing Removal Ref: RY17040-SCT
RIVA Racing air filter, sold separately for jet skis equipped with kit RK13090 and RK13100 Reference: RK13090-2
IDIARTEC start and stop switch Ref: CSS
Adapter for (Dump Valve, Pressure Regulator, etc.) on the intake manifold of Yamaha 1800 jet skis (SHO / SVHO) from RIVA Racing Reference: RY12110-VPA
Adaptable external compressor bearing from WSM for Yamaha 1800 jet-ski from 2011 to 2021 Reference: 010-131-01
IDIARTEC column wedge for Yamaha Jet-ski in +25 or +50mm Reference: EY-25 and EY-50
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha HO / SHO / SVHO / FZR / FZS Ref: RY30040-DSS
Retractable cleats for Yamaha jet skis Reference: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Mirror removal cover for YAMAHA FZR / FZS
Blowsion Aluminum Fuel Tank Cap for YAMAHA Ref: 04-03-15X
Set of hood fastening straps ref. 920723812 / 920723815
RIVA Racing handle extension kit for Yamaha jet skis from 2015 and newer Reference: RY24061-BES-3