IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO /.. More details
10 Item Items
Warning: Last items in stock!
Availability date:
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS
Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
COLUMN H 45
Aluminum column machined from mass and black anodized, Height 45mm, Bridges tightened with stainless steel screws, Handlebar tightening diameter 28.6 and diameter 22.2 with split reduction rings, Ø 28.6 x Ø 22.2.
COLUMN H 100
Aluminum column machined from mass and black anodized; height 100 mm, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2
COLUMN H 130 FIXED
Aluminum column machined from mass and black anodized; height 130 mm, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2
FIXED or CUSHIONED COLUMN H 160
Damped aluminum column entirely machined from the mass and color anodized. Damping by stainless steel spring, load 80 kg or 100 kg on request; easy replacement of the spring and seals by unscrewing 1 M12 nut. Lubrication of the mechanism with a manual pump and marine grease supplied with the column. Choice of mounting of handlebars without Ø 28.6 bar or Ø 22.2 handlebars with reinforcement bar in split aluminum rings Ø 28.6 x Ø 22.2.
FIXED or CUSHIONED COLUMN H 195
Damped aluminum column entirely machined from the mass and color anodized. Damping by stainless steel spring, load 80 kg or 100 kg on request; easy replacement of the spring and seals by unscrewing 1 M12 nut. Lubrication of the mechanism with a manual pump and marine grease supplied with the column. Choice of mounting of handlebars without Ø 28.6 bar or Ø 22.2 handlebars with reinforcement bar in split aluminum rings Ø 28.6 x Ø 22.2.
FIXED or CUSHIONED COLUMN H 230
Aluminum column machined from mass and black anodized; height 230mm, clamps tightened with stainless steel screws, handlebar clamping diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2
IDIARTEC reinforced steering axle for Yamaha...
370,45€
RIVA intake manifold ring for Yamaha jetski HO...
65,95€
Reinforced handlebar NEKEN 28mm Yellow ref:...
125,96€
High and low speed jet for Mikuni carburetor
2,95€
Handlebar with NEKEN reinforced tube of 28mm in...
111,96€
Riva titanium valve spring cover kit (16) for...
457,46€
33,95€
Makes it easier to load and unload your jet-ski...
54,86€
Grips ODI ROGUE 130mm, Black without flange...
33,95€
Riva O2 sensor mounting kit for Yamaha 1.8L...
303,96€ -20% 379,95€
PRO SERIES version Hydroturf mat for Seadoo GT...
339,95€
BLOWSION STEERING GEAR WITHOUT PLATE FOR...
223,96€ -20% 279,95€
Mikuni Additional Pump Reconditioning Kit ref....
30,95€
O-ring for Seadoo 300 Watercraft EASY RIDER...
7,95€
Balancing shaft pads or bearing shells,...
34,95€
Hydroturf mat PRO SERIES version for Kawasaki...
339,95€
Hydroturf saddle cover for Seadoo jetski : -...
369,95€
Reinforced transmission coupler for Ultra...
254,95€
Reinforced Column from the IDIARTEC brand for...
229,95€
Reviews for Idiartec Reinforced Column for Yamaha
to validate your identity, and the authenticity of the report