Subcategories
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
High performance air filter from Riva Racing in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
Hydroturf mat for Yamaha FZR / FZS jet skis from 2008 to 2016 and FX HO, FX HO Cruiser, FX SHO and FX SHO Cruiser from 2008 to 2011 Reference: HTFX1 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
ODI reinforced handlebar for saddle jet Reference: 06013082
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM Air Filter (Replacement for Original Equipment) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Bonnet attachment strap set ref. 920723812 / 920723815
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Original Yamaha jet ski workshop manual in paper format for the 2015 and 2016 FZR & FZS models Reference: LIT-18616-03-55
Original workshop manual in paper format for Yamaha jet ski, FZR / FZS model from 2009 to 2013 Reference: LIT-18616-03-18
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Anti-cavitation kit for Worx WR245 scoop for Yamaha FZR / FZS (SVHO) from 2014 and up Ref: WR0706
WORX anti-cavitation kit for for FZR / FZS (09-13) ref. WR0701
Yamaha 1.8 Compressed Freewheel Retaining Tool for Bearing Removal Ref: RY17040-SCT
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Anti cavitation turbine kit for Yamaha FZR / FZS (2014 and +) with scoop RIVA RY22051 Ref: RY25051 This kit allows to plug this mega'tron on the scoop and the water inlet.
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
IDIARTEC start and stop switch Ref: CSS
Blowsion Aluminum Fuel Cap for YAMAHA Ref: 04-03-15X
Adapter for (Dump Valve, Pressure Regulator ...) on the intake manifold of Yamaha 1800 jet skis (SHO / SVHO) from RIVA Racing Reference: RY12110-VPA
RIVA Racing high volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
Adaptable external compressor bearing from WSM for Yamaha 1800 jet-ski from 2011 to 2021 Reference: 010-131-01
IDIARTEC column wedge for Yamaha Jet-ski in +25 or +50mm Reference: EY-25 and EY-50
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
RIVA Racing air filter, sold alone for jet ski equipped with the RK13090 and RK13100 kit Reference: RK13090-2
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha HO / SHO / SVHO / FZR / FZS Ref: RY30040-DSS
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
Mirror removal cover for YAMAHA FZR / FZS
Handle extension kit from RIVA Racing for Yamaha jet skis from 2015 and more Reference: RY24061-BES-3
Anti cavitation turbine kit for Yamaha FZR / FZS 2009 to 2013 with bailer RIVA RY22050-1 Ref: RY25050-1 This kit allows to plug this mega'tron on the scoop and the water inlet.
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX