Subcategories
Propellers for all Kawasaki jet skis: KG-CD-13/19, KG-CD-14/20, KG-CD-14/21, KG-CD-15/21, KR-CD-14/21, KR-CD-15/22, KX-CD-10/16, KX-CD-16/21, KX-CD-15/23, KX-CD-16/24, KG-CD-16/22, KGX-CD-15/20, KGX-CD-12/16, KG-CD-11/17, KG-CD-12/18 (see the correspondence table at the bottom of the page)
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
3-piece Jettrim mat for Kawasaki Ultra jet ski - Ultra LX 160 until 2022 - 250X & 250LX - 260X & 260LX - 300X & 300LX - 310 X & 310 LX until 2021 Reference: KU250X102
Reinforced transmission coupler for Ultra 300/310 REF: CDK-300
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098070S
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098070G
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
Compressor pulley for Ultra 300 / 310 REF: PU-300X
Hydroturf Mat for Kawasaki Ultra Jet Ski - Ultra LX 160 until 2022 - 250 X & 250 LX - 260 X & 260 LX - 300 X & 300 LX - 310 X & 310 LX up to 2021 Reference: HT62 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Speed Magic exhaust trumpet for Kawasaki Ultra 250 / 260 / 300 / 310 ref. : SE-098062
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098069
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
Supports for 2 fuel cans for jet ski Reference: 52-4910
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 300 and 310 jet ski Reference: K6510DA
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
PROX piston kit (piston + segments + pin + circlips) for Kawasaki Ultra 300 ref. 01.4561.X
Riva Mirror Removal Kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 Ref: RK5-U250X-MB
Speed Magic Exhaust Cyclone for Kawasaki Ultra 250/260/300/310 ref. : SE-098066
Riva Ultra250/260/STX12&15F Rear Exhaust Outlet ref. RK16090-EO
Turbine Wedge Inclined by 2° from WORX Racing for Kawasaki Ultra 300 and 310 jet-ski Ref: WR05002
VALVE PAPEL KIT for Kawasaki 4-stroke 9.48mm from HOT CAMS Reference: HCSHIM02
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
RIVA MAPTUNERX cable for Kawasaki Ultra 300 / 310 ref. 01-MT018
COMETIC Reinforced Head Gasket for Kawasaki Available in 84 or 85mm Ref. C6222-84 or C6222-85
ODI reinforced handlebar for saddle jet Reference: 06013082
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Bonnet attachment strap set ref. 920723812 / 920723815
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Kawasaki ON/OFF switch Under the comodo
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
R&D 1° turbine spacer for Kawasaki Ultra 300 / 310 ref. 141-30000
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Reinforced aluminum belt tensioner roller with anti-corrosion treatment in Ø 80/ Ø85 with FAG 6203 bearing and stainless steel circlips (already assembled) REF: GT-300/310
Riva Racing brand reverse gear removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 jet skis References: RK5-U250X-RLB
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
IDIARTEC start and stop switch Ref: CSS
Intercooler Flushing Fitting Kit Ref: A7005
IDIARTEC reinforced turbine shaft for Kawasaki Ultra 300 / 310 Jet-ski REF: ATK-300
RIVA MAPTUNERX cable for Yamaha 1800 from 2008 to 2017 ref. 01-MT017
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Column wedge for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
RIVA Racing air filter, sold alone for jet ski equipped with the RK13090 and RK13100 kit Reference: RK13090-2
Universal wheel puller for 2-stroke jet skis References: 003-322 / 80-104
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Wastegate removal plate from RIVA Racing for Kawasaki Ultra 160LX / 250 / 260 / 300 / 310 jetski Reference: RK17090-WBO
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
WSM Adaptable Compressor Belt for Kawasaki Ultra 300 and 310 Jet Ski Ref.: 010-106
Brass through-hull from the IDIARTEC brand for Jet skis from the Kawasaki STX 15F and Ultra 300/310R brand References: PC
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX