Idiartec Reinforced Steering Column for Kawasaki

IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski

Reference: IDT-RK and IDT-RAK

H 45 COLUMN

Machined from solid aluminum and anodized black, 45mm high, clamps secured with stainless steel screws, handlebar clamping for 28.6mm and 22.2mm diameters with split reducing rings, Ø 28.6 x Ø 22.2. Sold separately

H 100 COLUMN

Machined from solid aluminum and anodized black; 100 mm high, clamps secured with stainless steel screws, handlebar clamp for 28.6 mm and 22.2 mm diameter handlebars with split reducing rings Ø 28.6 x Ø 22.2. Sold separately

FIXED H 130 COLUMN

Machined from solid aluminum and anodized black; 130 mm high, clamps secured with stainless steel screws, handlebar clamp for 28.6 mm and 22.2 mm diameter handlebars with split reducing rings Ø 28.6 x Ø 22.2. Sold separately

FIXED or SHOCK ABSORBED COLUMN H 160

Fully machined and anodized aluminum shock-absorbing column. Stainless steel spring damping; 80 kg or 100 kg load capacity upon request; easy replacement of the spring and seals by unscrewing one M12 nut. The mechanism is lubricated with a hand pump and marine grease supplied with the column. Can be mounted with either 28.6 mm diameter handlebars without a crossbar or 22.2 mm diameter handlebars with a crossbar, using 28.6 x 22.2 mm aluminum split rings . Sold separately.

FIXED or SHOCK ABSORBED COLUMN H 195

Fully machined and anodized aluminum shock-absorbing column. Stainless steel spring damping; 80 kg or 100 kg load capacity upon request; easy replacement of the spring and seals by unscrewing one M12 nut. The mechanism is lubricated with a hand pump and marine grease supplied with the column. Can be mounted with either 28.6 mm diameter handlebars without a crossbar or 22.2 mm diameter handlebars with a crossbar, using 28.6 x 22.2 mm aluminum split rings . Sold separately.

FIXED or SHOCK ABSORBED COLUMN H 230

Machined from solid aluminum and anodized black; 230mm high, clamps secured with stainless steel screws, handlebar clamps for 28.6mm and 22.2mm diameter handlebars with split reducing rings Ø 28.6 x Ø 22.2. Sold separately

H 300 COLUMN

Machined from solid aluminum and anodized black, 300mm high, for mounting on the original bracket, clamps secured with stainless steel screws, handlebar clamping for 28.6mm and 22.2mm diameters with split reducing rings Ø 28.6 x Ø 22.2. Sold separately