Subcategories
EASY RIDER Carter Screw Kit for Seadoo All 4-stroke Models (1500cc, 1600cc, 1630cc and 1700cc) except Seadoo Spark Ref: RS-4265
Set of 2 Reinforced Rear Engine Mounts EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4268
EASY RIDER Titanium Valve Cup Kit for Seadoo 4-stroke watercraft all models. Ref: RS-4214
Hydroturf mat PRO SERIES version for Seadoo GTX watercraft from 2002 to 2008 / GTX DI from 2002 to 2003 and RXT & X before 2009 Reference: PR88 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
Reinforced cylinder head studs from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4260A
Hydroturf saddle cover for Seadoo jetski : - GTX from 2007 to 2009 - GTX Limited from 2008 (Non IS) Reference: SEW881
WISECO piston for seadoo standard side 100.00mm ref. : 40038M10000
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 3 jet ski fuel cans Reference: 52-4911
CYLINDER HEAD STUD KIT FOR SEADOO 215/255/260 Ref: RS10050-HSK
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Riva thermostat kit for seadoo RXT/GTX -SC/RXP Ref: RS1015
Oil Vapor Tank and RIVA Breather Kit for Seadoo RXP 215, RXT 215, RXP-X 255, RXT-X 255, GTX 4 tec, RXP-X 260 watercraft, all models of RXT & GTX unsuspended, RXP-X 300, RXT-X 300, GTX Ltd 300, RXT 230, GTX 155, GTR 230, GTR-X 230 Reference: RS19050-BCC-6
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref. : 01.5594.XX
159mm turbine ring for seadoo 215 / 255 / 260 / 300 ref. RS33-159-SRX
RIVA Racing reinforcement for Seadoo 215, 255, 260 and 300 watercraft intake manifold Ref: RS12050-IMG
WISECO piston for seadoo side 100.50mm ref. : 40038M10050
AQUA SPORT PERFORMANCE Anodized Water Pump Cover for Seadoo 1500 watercraft ref. : SD-16007B (black) / SD-16007R (red)
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Worx intake manifold reinforcement for Seadoo Ref: WR04005
WISECO piston for seadoo coast 101.00mm ref. : 40038M10100
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 159mm Solas for seadoo 215 / 255 / 260 Ref: SRX-HS-159-02
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
Riva direct exhaust outlet for Seadoo RXT / GTX -SC / RXP Ref: RS15050-ET
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Hydroturf mat for seadoo GTX DI (02-03), GTX 4-tec (02-05), GTX (03-08), RXT & RXT-X (2009 and before) watercraft Ref. HT88 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT-X/GTX-SC/RXP-X 08 (255HP) Ref: RS1751-HDW-948
Riva turbine spacer for Seadoo Ref: RS23050
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT/GTX-SC/RXP from 2006 to 2007 Ref: RS1751-HDW-946
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
Spacer between Original Kawasaki STX 15F Jetski Plate and Idiartec Column Reference: EK-50/15F
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
OPAS RIVA COMPETITION SEA DOO RXP /RXT / GTX (2003+) 215/255 CONDEMNATION KIT References: RS29050-1
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
ODI reinforced handlebar for saddle jet Reference: 06013082
Worx brand start/stop switch for Seadoo Ref: WR06015
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Compressor tool 16 teeth (SD 215) Ref: 613-96016