Special adhesive for hydroturf carpets / Jettrim

- Marine-grade liquid neoprene adhesive specifically for jet skis. For Hydroturf, Jet Traction, Gator Grip or Ap design brand mats.
Allows bonding even for free ride jet skis with full fairings.
125ml tube or 1000ml jar.

Preparation of the supports

The surfaces to be glued must be clean, dry, dust-free and grease-free.
The metals must be deoxidized and degreased.
On very smooth surfaces (especially rubbers), it is recommended to perform a grinding followed by a stripping to promote adhesion.
Do not stick on cold materials (minimum +15°C).

Instructions for use

Apply using a brush or a notched spatula.
Apply an even layer of glue to each surface to be joined. On very porous materials, it is advisable to apply two layers of glue (allow at least one hour to dry before applying the second layer).
Allow the solvents to evaporate until the glue no longer sticks to your fingers (approximately 15 to 20 minutes).
Bring the glued surfaces into contact and then apply firm pressure for a few seconds (15 to 20 seconds minimum) to ensure perfect contact between the two adhesive films. The bond is immediate and cannot be readjusted.
Optimal resistance is achieved after approximately 72 hours.
Given the diversity of materials to be bonded and working methods, the use of our products is recommended only after trials or compatibility tests. Use that does not comply with our recommendations or warnings will release us from liability.