Subcategories
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Anti-spray bib in 41 inch or 104cm from Hydroturf for jet-ski Reference: TS01
Hood gasket 13mm (1/2") for arm jet ref. TS55
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
Yamaha cover storage bag ref. MWVWVRNRBG01
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
MUFFLER HOSE 100MM X 52MM (4''X 2-1/16'') FACTORY PIPE Ref: COMHOS0100
Stainless steel towing ring for arm jet ref. QL-02
Water protection sock for K&N air filter (see table below)
Lateral foot block 33x5cm ref. TS43
90° aluminum insert with rubber for supplying the tank Reference: FU-LI-FIT
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
WSM air filter adapter for Mikuni 38/40 mm carburetor Ref: 006-664
2 inch PAD or 5.08cm from Hydroturf for Yamaha Superjet arm jet Reference: TS422
Pre-filter for high performance RY1301-1 air filter from RIVA Racing Reference: RY1301PF-B
Set of 4 anodized mass-size aluminum washers to replace the adjustable shim plate fixing washers. Ref: 04-04-01X
COVER FOR TAU CETI TORNADO AIR FILTER Ref: PF-TCP-25
Rear foot block 5.08cm ref. KICK02
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm without oil injection Ref: 006-660
Damper for RRP Coupler for all Rickter and Yamaha except 66M/66E/66V Reference: RRP-EG-DAMP
RRP coupler spacer Reference: CPL-SPC
Empty ball hold from BNJ for Yamaha jet ski all models Reference: BNJDRAIN
PAD of 1 inch or 2.54cm from Hydroturf for Yamaha Superjet arm jet Reference: TS421
WSM or SBT adapter (depending on availability) for air filter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
Tau ceti air filter cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
WSM or SBT adapter (depending on arrival) for air filter for 44 mm Mikuni carburettor with oil injection Ref: 006-661-01
WSM or SBT adapter (depending on arrival) for air filter for Mikuni 57 mm carburettor for XLT, GP & GPR Ref: 006-667
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm with oil injection Ref: 006-660-01
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
COVER FOR AIR FILTER TAU CETI ROUND EP:1,5'' Ref: PF-TCP-01
SOLAS propeller tip for Yamaha jet-ski (assembly 2) ref. SLA009
Instant disassembly connection for garden hose Ref: SC-2900
Ignition Cover Gasket 650/701/760 ref. 2360
Rear foot block 2.54cm ref. KICK01
WSM or SBT adaptable propeller remover (Depending on availability) for original Yamaha, Kawasaki, Seadoo, Polaris, Tigershark jet ski propellers
Aluminum nose bolt for Yamaha ref. 57-63XX
Exhaust head gasket from Riva Racing for Yamaha 650 and 701 jet skis from 1993 to 1997 Reference: RY15-9060
Skat Trak propeller rubber for KAWASAKI / SEADOO / YAMAHA Swirl propeller ref. RIMPNOSEBOOT7
H2O water protection sock for PROK air filter ref. 006-580
Rinsing nozzle with adaptable gardena connection from the WSM brand for Yamaha jet-ski References: 011-250
SOLAS propeller tip for Yamaha jet-ski (assembly 1) ref. SL003, SLA008, SLA008A, SLA009A, SLA009, SL007, SL009, SLA014 and SLA016
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tube or 1L jar References: BOKM502930 or BOKM502932
Oil pump removal plate and seals adaptable WSM or SBT (depending on availability) for Jet-ski Yamaha, Kawasaki, Sea-doo and Polaris
Propeller remover for SOLAS propeller on Yamaha jet-ski (2 tools are sometimes necessary: example for propellers whose reference begins with YA, you will need the WR003 model to hold the propeller and the WR003H model to hold the shaft) ref. WR001, WR003, WR003H, WR004, WR004H, WR007, WR007H, WR014, WR014H, WR014A and WR015
Adaptable seal WSM or SBT (Depending on arrival) for Block Off casing for Kawasaki, Polaris, Seadoo and Yamaha jet-skis