Subcategories
Turbine body from SOLAS by RIVA Racing in 155mm for Yamaha jet ski from 1994 to 1999 Reference: YDS-HS-155
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13 /19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X ( 15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD-CD-14/20, Y D-SC-X0 (14.5-17.5 ), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD- SC-I...
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 3 jet ski fuel cans Reference: 52-4911
Flywheel Cover from BLOWSION for Yamaha Superjet hand jet Reference: 01-03-36X
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Yamaha wave raider jet ski ref. HT76 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf seat cover for Yamaha Wave raider jet ski Reference: SEW76
MSD ignition support for Yamaha Ref: 01-04-419
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Kit of 6 cylinder head studs from ADA Racing for Yamaha brand jet-ski Reference: YA701GA
Blowsion Aluminum blowsion tank cap for YAMAHA Ref: 04-03-15X
IDIARTEC start and stop switch Ref: CSS
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
Retractable cleats for Yamaha jet-ski References: MWV-PUCLE-AT-07
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Handlebar with NEKEN reinforcement bar for saddle jet ref. 060129XX
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
PROK air filter for 1 jet ski carburetor ref. 006-585
VersiPlug brand bilge emptyer for Yamaha Jet-ski from 1992 to 2003 as well as for Yamaha GPR from 2000 to 2006 References: PD1201
Pro-Series 3 cylinder head gasket kit from RIVA Racing for Yamaha brand jetski, model 1100 & 1200 Reference: RY10028-O
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Duckbill for Yamaha all models Ref: RY8100 Quick fit drains in the location of the original drain plugs. One-way non-return valve . Not recommended for use with a jetski stored in water permanently.
Yamaha cover storage bag ref. MWVWVRNRBG01
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
Empty ball hold from Blowsion for Yamaha all models (aluminum or black colors) Ref: 06-01-062 / 06-01-063 Automatic ball valve plug for YAMAHA Its plastic ball system allows the hold to be emptied during navigation and closed when the jet remains static, using water pressure.
Water protection sock for K&N air filter (see table below)
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
Stainless steel towing ring for saddle jet ski
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX
WSM air filter adapter for Mikuni 38/40 mm carburetor Ref: 006-664
Pre-filter for high performance RY1301-1 air filter from RIVA Racing Reference: RY1301PF-B
COVER FOR TAU CETI TORNADO AIR FILTER Ref: PF-TCP-25
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm without oil injection Ref: 006-660
Empty ball hold from BNJ for Yamaha jet ski all models Reference: BNJDRAIN
WSM or SBT adapter (depending on availability) for air filter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
WSM or SBT adapter (depending on arrival) for air filter for Mikuni carburettor in 38 mm with oil injection Ref: 006-660-01
WSM or SBT adapter (depending on arrival) for air filter for 44 mm Mikuni carburettor with oil injection Ref: 006-661-01