No products
Wave Venture 1100
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
Wave Venture 1100
Subcategories
-
379,95€ Delivery within 2 to 10 daysSOLAS turbine body 155mm Yamaha (94-99)
SOLAS by RIVA Racing 155mm turbine body for Yamaha jet skis from 1994 to 1999 Reference: YDS-HS-155
379,95€Delivery within 2 to 10 days -
319,95€ Delivery within 2 to 10 days
BLOWSION Flywheel Cover
BLOWSION Flywheel Cover for Yamaha Superjet Hand Jet Reference: 01-03-36X
319,95€Delivery within 2 to 10 days -
307,66€ 361,95€ -15% In stock
COVERCRAFT Yamaha Transport Cover
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
307,66€ 361,95€ -15%Reduced price!In stock -
299,95€ In stock
Professional Jet Ski Lifting Tool
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
299,95€In stock -
271,96€ 319,95€ -15% In stock
SOLAS propeller for Yamaha 2-stroke jet ski
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13/19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X (15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD-CD-14/20, Y D-SC-X0 (14.5-17.5), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD-SC-I...
271,96€ 319,95€ -15%Reduced price!In stock -
269,95€ Made to order, theoretically deliverable within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Made to order, theoretically deliverable within 2 to 10 days -
239,96€ 299,95€ -20% In stock
Holders for 3 fuel cans
3 fuel can holders for jet skis Reference: 52-4911
239,96€ 299,95€ -20%Reduced price!In stock -
239,95€ Made to order, theoretically deliverable within 1 to 3 weeks
Seat cover for Wave Venture (94-96)
Hydroturf Seat Cover for Yamaha WaveVenture Jet Skis from 1994 to 1996 Reference: SEW78
239,95€Made to order, theoretically deliverable within 1 to 3 weeks -
174,95€ Delivery within 2 to 10 days
MSD Yamaha ignition support
MSD ignition support for Yamaha Ref: 01-04-419
174,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
159,96€ 199,95€ -20% In stock
Supports for 2 fuel cans
Supports for 2 fuel cans for jet ski Reference: 52-4910
159,96€ 199,95€ -20%Reduced price!In stock -
159,95€ Delivery within 1 to 3 weeks
Wave Venture treadmill / XL 700 / 760 / 1200
Hydroturf carpet for Yamaha Wave Venture / XL 700 (98-04) / XL 760 (98-04) and XL 1200 (98) jet ski ref. HT78 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
159,95€Delivery within 1 to 3 weeks -
139,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebars...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
139,95€Made to order, theoretically deliverable within 2 to 10 days -
134,95€ Made to order, theoretically deliverable within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Made to order, theoretically deliverable within 2 to 10 days -
125,96€ 139,95€ -10% In stock
ODI Reinforced Universal Handlebar
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
125,96€ 139,95€ -10%Reduced price!In stock -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Made to order, theoretically deliverable within 2 to 10 days -
119,95€ Delivery within 2 to 10 days
Waterproof Switch for Yamaha
YAMAHA WATERPROOF SWITCH Ref: 57-3017
119,95€Delivery within 2 to 10 days -
109,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
107,96€ 119,95€ -10% In stock
Idiartec double start/stop switch (20+)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
107,96€ 119,95€ -10%Reduced price!In stock -
104,95€ Delivery within 2 to 10 days
ADA cylinder head stud kit for Yamaha
Kit of 6 cylinder head studs from ADA Racing for Yamaha brand jet-ski Reference: YA701GA
104,95€Delivery within 2 to 10 days -
101,96€ 119,95€ -15% In stock
Jet ski hood tie-down strap set
Hood attachment strap set ref. 920723812 / 920723815
101,96€ 119,95€ -15%Reduced price!In stock -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
87,26€ 96,95€ -10% In stock
Blowsion aluminum fuel cap for Yamaha
Blowsion Aluminum Fuel Cap for YAMAHA Ref: 04-03-15X
87,26€ 96,95€ -10%Reduced price!In stock -
80,95€ Delivery within 2 to 10 days
Yamaha Jet Ski Retractable Cleats
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
80,95€Delivery within 2 to 10 days -
80,70€ 84,95€ -5% In stock
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
80,70€ 84,95€ -5%Reduced price!In stock -
78,95€ Delivery within 2 to 10 days
RIVA high performance air filter for 2T
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
78,95€Delivery within 2 to 10 days -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
68,95€ Delivery within 2 to 10 days
RIVA hood attachment set for jet-ski
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
68,95€Delivery within 2 to 10 days -
64,95€ In stock
PROK air filter for 1 carburetor
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
64,95€In stock -
59,36€ 65,95€ -10% In stock
Duckbill for Yamaha all models
Duckbill for Yamaha all models Ref: RY8100 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored permanently in the water.
59,36€ 65,95€ -10%Reduced price!In stock -
56,95€ Delivery within 2 to 10 days
NEKEN 22mm Handlebar with Reinforcement Bar
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
56,95€Delivery within 2 to 10 days -
52,95€ Delivery within 2 to 10 days
RIVA cylinder head gasket kit for Yamaha...
Pro-Series 3 cylinder head gasket kit from RIVA Racing for Yamaha brand jetski, model 1100 & 1200 Reference: RY10028-O
52,95€Delivery within 2 to 10 days -
47,56€ 55,95€ -15% In stock
VersiPlug bilge drain for Yamaha 92-03,...
VersiPlug brand bilge drain for Yamaha Jet-skis from 1992 to 2003 as well as for Yamaha GPR from 2000 to 2006 References: PD1201
47,56€ 55,95€ -15%Reduced price!In stock -
46,95€ Delivery within 2 to 10 days
Yamaha storage bag for transport tarpaulin
Yamaha cover storage bag ref. MWVWVRNRBG01
46,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
45,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
45,95€Delivery within 2 to 10 days -
42,95€ Made to order, theoretically deliverable within 2 to 10 days
3M neoprene spray glue 500ml
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
42,95€Made to order, theoretically deliverable within 2 to 10 days -
42,70€ 44,95€ -5% In stock
Blowsion bilge drain for Yamaha all models
Blowsion ball joint for Yamaha all models (in aluminum or black) Ref: 06-01-062 / 06-01-063 Automatic ball-type deck filler cap for YAMAHA Its plastic ball system allows the bilge to be emptied during navigation and closed when the jet remains static, using water pressure.
42,70€ 44,95€ -5%Reduced price!In stock -
42,46€ 49,95€ -15% In stock
Riva 38mm Air Filter Adapter
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
42,46€ 49,95€ -15%Reduced price!In stock -
39,56€ 43,95€ -10% In stock
K&N Filter Protection Sock
K&N Air Filter Water Protection Sock (see table below)
39,56€ 43,95€ -10%Reduced price!In stock -
37,95€ Made to order, theoretically deliverable within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
37,95€Made to order, theoretically deliverable within 2 to 10 days -
34,95€ Delivery within 2 to 10 days
Connection for flushing hoses
Instant disassembly connection for garden hose Ref: SC-2900
34,95€Delivery within 2 to 10 days -
33,26€ 36,95€ -10% In stock
Dissolved Hydroturf Carpet Glue / Jettrim
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
33,26€ 36,95€ -10%Reduced price!In stock -
32,95€ Delivery within 2 to 10 days
TAU CETI air filter cover
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
32,95€Delivery within 2 to 10 days -
32,36€ 35,95€ -10% In stock
RIVA pre-filter for 2T engine air filter
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
32,36€ 35,95€ -10%Reduced price!In stock -
30,95€ Delivery within 2 to 10 days
Kit recond. Addi pump. Mikuni
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
30,95€Delivery within 2 to 10 days -
30,95€ In stock
Stainless steel towing ring for saddle jet
Stainless steel towing ring for saddle jet skis
30,95€In stock -
27,95€ Delivery within 2 to 10 days
Round air filter cover EP: 1.5'
COVER FOR TAU CETI ROUND AIR FILTER THICKNESS:1.5'' Ref: PF-TCP-01
27,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38/40 mm carburetor
WSM Air Filter Adapter for Mikuni 38/40mm Carburetor Ref: 006-664
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38mm carburetor
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor without oil injection Ref: 006-660
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Air Filter Cover 4"x3"/3.25"
Tau Ceti Air Filter Cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Carburetor filter adapter. mikuni 46mm
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 44mm carburetor
WSM or SBT (depending on availability) air filter adapter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
26,95€Delivery within 2 to 10 days
