No products
XL 800
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Destocking
- E-Foil
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Jet pilot equipment
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
vehiculier
XL 800
Subcategories
-
379,95€ Delivery within 2 to 10 daysSOLAS Turbine Body for 700, 760 & 800cc
Solas stainless steel propeller body 144mm for Yamaha GP 800 (98-00), XL 800 (98-99), GP 760 (97-00), Wave raider 760 (96), Wave Radier 700 (94-97), Wave deluxe 700 (94-97), Wave Venture 700 (94-97), Wave Blaster 700 (93-97), Wave Runner 700 (93-97), VXR Pro 700 (93-97), Superjet 700 (94-16) Reference: YBS-HS-144
379,95€Delivery within 2 to 10 days -
359,95€ Delivery within 2 to 10 days
Solas 155mm Turbine Body for Yamaha
Solas 155mm Turbine Body for Yamaha ref. YFS-HS-155
359,95€Delivery within 2 to 10 days -
329,95€ Delivery within 2 to 10 days
Worx Sponsors Yamaha XL 800/1200LTD (99-01)
Worx sponsons for Yamaha jet skis, XL800 and XL1200 LTD models from 1999 to 2001 Reference: WR520
329,95€Delivery within 2 to 10 days -
319,95€ Delivery within 2 to 10 days
BLOWSION Flywheel Cover
BLOWSION Flywheel Cover for Yamaha Superjet Hand Jet Reference: 01-03-36X
319,95€Delivery within 2 to 10 days -
307,66€ 361,95€ -15% In stock
COVERCRAFT Yamaha Transport Cover
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
307,66€ 361,95€ -15%Reduced price!In stock -
279,95€ Made to order, theoretically deliverable within 1 to 3 weeks
Cover for XL 800 & XL 1200 Ltd (99)
Hydroturf seat cover for Yamaha jet ski XL 800 / XL 1200 Ltd from 1999 Reference: SEW784
279,95€Made to order, theoretically deliverable within 1 to 3 weeks -
271,96€ 319,95€ -15% In stock
SOLAS propeller for Yamaha 2-stroke jet ski
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13/19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X (15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD-CD-14/20, Y D-SC-X0 (14.5-17.5), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD-SC-I...
271,96€ 319,95€ -15%Reduced price!In stock -
269,95€ Made to order, theoretically deliverable within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Made to order, theoretically deliverable within 2 to 10 days -
259,95€ Made to order, theoretically deliverable within 1 to 3 weeks
RIVA air filter kit for Yamaha 800 (98-05)
RIVA Racing air filter kit for Yamaha jet skis, model GP800/800R XL/XLT800 from 1998 to 2005 Reference: RY1317-KIT-1
259,95€Made to order, theoretically deliverable within 1 to 3 weeks -
239,96€ 299,95€ -20% In stock
Professional lifting tool for jet skis
Professional lifting tool for stand-up jet skis and jet skis (1, 2, 3 seats) & SUVs up to 700kg Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
239,96€ 299,95€ -20%Reduced price!In stock -
239,96€ 299,95€ -20% In stock
Holders for 3 fuel cans
Holders for 3 fuel cans for jet ski Reference: 52-4911
239,96€ 299,95€ -20%Reduced price!In stock -
174,95€ Delivery within 2 to 10 days
MSD Yamaha ignition support
MSD ignition support for Yamaha Ref: 01-04-419
174,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
159,96€ 199,95€ -20% In stock
Holders for 2 fuel cans
Holders for 2 fuel cans for jet ski Reference: 52-4910
159,96€ 199,95€ -20%Reduced price!In stock -
149,95€ Made to order, theoretically deliverable within 1 to 3 weeks
Floor mats for XL/XLT 800/1200 (99-05)
Hydroturf mat for Yamaha XL 1200 Limited (99-04) / XL 800 / XLT 800 / XLT 1200 jet skis from 1999 to 2005 ref. HT784 All Hydroturf products are custom-made and individually produced. They require a minimum manufacturing time of 15 business days. They are non-returnable and non-exchangeable.
149,95€Made to order, theoretically deliverable within 1 to 3 weeks -
149,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Fluorescent Green...
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3780
149,95€Made to order, theoretically deliverable within 2 to 10 days -
139,95€ Made to order, theoretically deliverable within 2 to 10 days
Riva XL800/1200 anti-cavitation kit
Riva XL800/1200 anti-cavitation kit Ref: RY2519
139,95€Made to order, theoretically deliverable within 2 to 10 days -
134,95€ Made to order, theoretically deliverable within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Made to order, theoretically deliverable within 2 to 10 days -
129,95€ Made to order, theoretically deliverable within 2 to 10 days
Reinforced ODI universal handlebar
ODI reinforced handlebars for sit-down jet skis Reference: 06013082
129,95€Made to order, theoretically deliverable within 2 to 10 days -
124,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Made to order, theoretically deliverable within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
119,95€ Delivery within 2 to 10 days
Waterproof Switch for Yamaha
YAMAHA WATERPROOF SWITCH Ref: 57-3017
119,95€Delivery within 2 to 10 days -
109,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Made to order, theoretically deliverable within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
107,96€ 119,95€ -10% In stock
Idiartec double start/stop switch (20+)
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
107,96€ 119,95€ -10%Reduced price!In stock -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
93,95€ Delivery within 2 to 10 days
Riva anti-cavitation kit for GP 1800 & VX
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
93,95€Delivery within 2 to 10 days -
80,95€ In stock
Retractable cleats for Yamaha jet skis
Retractable cleats for Yamaha jet skis Reference: MWV-PUCLE-AT-07
80,95€In stock -
80,70€ 84,95€ -5% In stock
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
80,70€ 84,95€ -5%Reduced price!In stock -
78,95€ Delivery within 2 to 10 days
RIVA high performance air filter for 2T
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
78,95€Delivery within 2 to 10 days -
78,26€ 86,95€ -10% In stock
Blowsion aluminum fuel tank cap for Yamaha
Blowsion Aluminum Fuel Tank Cap for YAMAHA Ref: 04-03-15X
78,26€ 86,95€ -10%Reduced price!In stock -
75,95€ 79,95€ -5% In stock
Jet ski hood fastening strap set
Set of hood fastening straps ref. 920723812 / 920723815
75,95€ 79,95€ -5%Reduced price!In stock -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
68,95€ Delivery within 2 to 10 days
RIVA hood attachment set for jet-ski
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
68,95€Delivery within 2 to 10 days -
64,95€ In stock
PROK air filter for 1 carburetor
PROK air filter for 1 jet ski carburetor ref. 006-585
64,95€In stock -
51,95€ Made to order, theoretically deliverable within 2 to 10 days
NEKEN 22mm handlebar with reinforcement bar
NEKEN handlebar with reinforcement bar for sit-down jet ski ref. 060129XX
51,95€Made to order, theoretically deliverable within 2 to 10 days -
47,56€ 55,95€ -15% In stock
VersiPlug bilge drain for Yamaha 92-03,...
VersiPlug brand bilge drain for Yamaha Jet-skis from 1992 to 2003 as well as for Yamaha GPR from 2000 to 2006 References: PD1201
47,56€ 55,95€ -15%Reduced price!In stock -
46,95€ Delivery within 2 to 10 days
Yamaha storage bag for transport tarpaulin
Yamaha cover storage bag ref. MWVWVRNRBG01
46,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
45,95€Delivery within 2 to 10 days -
45,95€ Delivery within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
45,95€Delivery within 2 to 10 days -
42,95€ Made to order, theoretically deliverable within 2 to 10 days
3M neoprene spray glue 500ml
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
42,95€Made to order, theoretically deliverable within 2 to 10 days -
42,46€ 49,95€ -15% In stock
Riva 38mm Air Filter Adapter
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
42,46€ 49,95€ -15%Reduced price!In stock -
39,56€ 43,95€ -10% In stock
K&N filter protection sock
K&N air filter water protection sock (see table below)
39,56€ 43,95€ -10%Reduced price!In stock -
37,95€ Made to order, theoretically deliverable within 2 to 10 days
RIVA Black End Caps and Clamps for ODI...
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
37,95€Made to order, theoretically deliverable within 2 to 10 days -
34,95€ Delivery within 2 to 10 days
Connection for flushing hoses
Instant disassembly connection for garden hose Ref: SC-2900
34,95€Delivery within 2 to 10 days -
32,95€ Delivery within 2 to 10 days
TAU CETI air filter cover
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
32,95€Delivery within 2 to 10 days -
32,36€ 35,95€ -10% In stock
RIVA pre-filter for 2T engine air filter
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
32,36€ 35,95€ -10%Reduced price!In stock -
31,41€ 36,95€ -15% In stock
Dissolves Hydroturf Carpet Glue / Jettrim
Bostik Agosolvant thinner/solvent for neoprene, nitrile, PU, and acrylic carpet adhesives (Origine, Hydroturf, Jettrim, etc.)... Sold in 1L containers Reference: BOKM511310
31,41€ 36,95€ -15%Reduced price!In stock -
30,95€ Delivery within 2 to 10 days
Kit recond. Addi pump. Mikuni
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
30,95€Delivery within 2 to 10 days -
30,95€ In stock
Stainless steel towing ring for sit-down...
Stainless steel towing ring for sit-down jet skis
30,95€In stock -
27,95€ Delivery within 2 to 10 days
Round air filter cover EP: 1.5'
COVER FOR TAU CETI ROUND AIR FILTER THICKNESS:1.5'' Ref: PF-TCP-01
27,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38/40 mm carburetor
WSM Air Filter Adapter for Mikuni 38/40mm Carburetor Ref: 006-664
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38mm carburetor
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor without oil injection Ref: 006-660
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Air Filter Cover 4"x3"/3.25"
Tau Ceti Air Filter Cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
26,95€Delivery within 2 to 10 days -
20,99€ 69,95€ -70% In stock
Duckbill fairing for all Yamaha models
Duckbill for all Yamaha jet ski models Reference: RY8100
20,99€ 69,95€ -70%Reduced price!In stock
