Subcategories
IDIARTEC Reinforced Engine Coupler for Kawasaki Ultra 300/310 Jet Ski REF: CMK-300
Hydroturf Seat Cover for Kawasaki Ultra 310 R & 310 X SE Jet Skis from 2014 and up Reference: SEW621
Hydroturf seat cover for Kawasaki jet ski: - Ultra LX 160 from 2007 to 2008 - Ultra 250 from 2007 to 2008 - Ultra 260X from 2009 to 2013 - Ultra 300X from 2011 to 2014 - Ultra 310X from 2014 and + Reference: SEW62
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098070S
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098070G
Propellers for all Kawasaki jet skis: KG-CD-13/19, KG-CD-14/20, KG-CD-14/21, KG-CD-15/21, KR-CD-14/21, KR-CD-15/22, KX-CD-10/16, KX-CD-16/21, KX-CD-15/23, KX-CD-16/24, KG-CD-16/22, KGX-CD-15/20, KGX-CD-12/16, KG-CD-11/17, KG-CD-12/18 (see the cross-reference table at the bottom of the page)
Jettrim 3-piece mat for Kawasaki Ultra jet ski - Ultra LX 160 until 2022 - 250 X & 250 LX - 260 X & 260 LX - 300 X & 300 LX - 310 X & 310 LX up to 2021 Reference: KU250X102
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
Speed Magic exhaust trumpet for Kawasaki Ultra 250 / 260 / 300 / 310 ref. : SE-098062
Speed Magic exhaust outlet for Kawasaki Ultra 250/260/300/310 ref. : SE-098069
Speed control box (electronic engine release) from RIVA for Kawasaki Ultra 300 and 310 jet skis Ref: RK11110-SCOM
Reinforced transmission coupler for Ultra 300/310 REF: CDK-300
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
TBM Turbine Cone for Kawasaki Ultra 250 / 260 / 300 / 310 ref. TBM120-UL
Compressor pulley for Ultra 300 / 310 REF: PU-300X
Speed Magic Exhaust Cyclone for Kawasaki Ultra 250/260/300/310 ref. : SE-098066
Holders for 2 fuel cans for jet ski Reference: 52-4910
Kawi Performance brand spring tensioner upgrade kit for Kawasaki jet skis, Ultra 300 & 310 models from 2011 to 2024 Reference: 30300-5025A
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Kawasaki Available in 84 or 85mm Ref. C6222-84 or C6222-85
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
Riva Mirror Removal Kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 Ref: RK5-U250X-MB
Machined from solid block, by IDIARTEC for Kawasaki Ultra 310 jet skis, available in Ø47 or Ø50 base Reference: NK-310
TBM Through-Hull Reinforcement for Kawasaki 550, 650, 750, 800cc, STX 15F, 15F and Ultra 250 / 260 / 300 / 310 Jet Skis Ref: TBM141
Rear exhaust outlet for Riva Ultra 250/260/STX 12 & 15F ref. RK16090-EO
Hydroturf Mat for Kawasaki Ultra Jet Ski - Ultra LX 160 until 2022 - 250 X & 250 LX - 260 X & 260 LX - 300 X & 300 LX - 310 X & 310 LX up to 2021 Reference: HT62 All Hydroturf products are custom-made and individually manufactured. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3780
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 300 and 310 jet skis Reference: K6510DA
WORX Racing 2° Angled Turbine Shim for Kawasaki Ultra 300 and 310 Jet Skis Ref: WR05002
R&D 1° Turbine Spacer for Kawasaki Ultra 300 / 310 ref. 141-30000
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
RIVA MAPTUNERX cable for Kawasaki Ultra 300 / 310 ref. 01-MT018
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
ODI reinforced handlebars for sit-down jet skis Reference: 06013082
VALVE SHAKE KIT for Kawasaki 4-stroke 9.48mm engines from HOT CAMS Reference: HCSHIM02
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
NEKEN handlebar with reinforced tubing, 28mm in the center and 22mm at the ends, allowing the mounting of any type of grip Reference: 0601-3334
Kawasaki ON/OFF switch Under the stalk
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Riva Racing brand reverse gear removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 jet skis References: RK5-U250X-RLB
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
Reinforced aluminum belt tensioner pulley with anti-corrosion treatment in Ø 80/ Ø85 with FAG 6203 bearing and stainless steel circlips (pre-assembled) REF: GT-300/310
IDIARTEC reinforced turbine axle for Kawasaki Ultra 300 / 310 Jet-ski REF: ATK-300
IDIARTEC start and stop switch Ref: CSS
Intercooler Flush Fitting Kit Ref: A7005
RIVA MAPTUNERX Cable for Yamaha 1800 from 2008 to 2017 ref. 01-MT017
Steering column shim for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Universal wheel puller for 2-stroke jet skis References: 003-322 / 80-104
RIVA Racing air filter, sold separately for jet skis equipped with kit RK13090 and RK13100 Reference: RK13090-2
Set of hood fastening straps ref. 920723812 / 920723815