Subcategories
Riva Valve Lifter Tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
WORX Shovel Scoop for Yamaha VXR / VXS ref.: WR240
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Professional lifting tool for stand-up jet skis and jet skis (1, 2, 3 seats) & SUVs up to 700kg Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha VXR / VXS jet ski Reference: BGG-VXR
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha VXR/VXS hand jet ref. YVXR102
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
IDIARTEC reinforced steering axle for Yamaha GP1800 and VXR / VXS jet-skis from 2016 and up Reference: ADY-GP1800
Holders for 3 fuel cans for jet ski Reference: 52-4911
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Reinforced Column from the IDIARTEC brand for Jet ski from the Yamaha brand VXR models References: CYVXR-XXX
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Right side electronic trigger (accelerator) from IDIARTEC for Yamaha VXR / VXS jet ski Reference: GD-VXR
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Holders for 2 fuel cans for jet ski Reference: 52-4910
Paper workshop manual for Yamaha VXR, VXS & VX HO 1.8 jet skis from 2015 onwards Reference: LIT-18616-03-63
RIVA Racing Pro bar handlebar with reinforcement and protective foam, 30" (76cm) Ref: RY205BK-BAR-2
High-performance air filter from Riva Racing, original size, for Yamaha HO / SHO / SVHO jet skis Reference: RY13040-OE-2
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
WORX Racing 2° Angled Turbine Bracket for Yamaha 1800 Jet Ski Ref: WR05004
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM air filter (direct replacement for the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS As a replacement for the original part number 6S5-E4451-00-00 ref. 006-590
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
RIVA Racing high-volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
7.48mm Valve Shim Kit for Yamaha 4-stroke Jet Skis from HOT CAMS Reference: HCSHIM01
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
RIVA Racing Pro bar 29" (73cm) handlebar with reinforcement and protective foam Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
IDIARTEC start and stop switch Ref: CSS
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
RIVA Racing handle extension kit for Yamaha jet skis from 2015 and up Reference: RY24061-BES-3
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo (before 2009) and Yamaha 1.8L watercraft or jet ski Reference: A2025
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
Red or blue anodized oil cap from RIVA Racing for Yamaha 1.8 jet ski, all models. Reference: RY19040-OC
Removes the original fuel regulator in order to install a racing regulator on Yamaha 1800 jet skis, all models. Ref.: YH-16101