Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha VXR / VXS jet ski Reference: BGG-VXR
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Hydroturf seat cover for Yamaha jet ski: - VXS from 2009 - VX from 2005 to 2009 - VX Sport from 2005 to 2009 - VX Deluxe from 2005 to 2009 Reference: SEWVX
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha VXR/VXS hand jet ref. YVXR102
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Right side electronic trigger (accelerator) from IDIARTEC for Yamaha VXR / VXS jet ski Reference: GD-VXR
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Supports for 2 fuel cans for jet ski Reference: 52-4910
Paper workshop manual for Yamaha VXR, VXS & VX HO 1.8 jet skis from 2015 and up Reference: LIT-18616-03-63
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
High performance air filter from Riva Racing in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM Air Filter (Replacement for Original Equipment) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
RIVA Racing Pro bar 29" (73cm) handlebar with reinforcement and protective foam Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
IDIARTEC start and stop switch Ref: CSS
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
RIVA Racing high volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
RIVA Racing handle extension kit for Yamaha jet skis from 2015 and up Reference: RY24061-BES-3
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo watercraft (before 2009) and Yamaha 1.8L jet ski Reference: RS8100 or A2025
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
RIVA Racing red or blue anodized oil cap for Yamaha 1.8 jet skis, all models. Reference: RY19040-OC
Removes the original fuel regulator in order to install a racing regulator on Yamaha 1800 jet skis, all models. Ref.: YH-16101
RIVA Racing cover plate for the original Yamaha Ride throttle body of your jet ski Reference: RY24110-SC
RIVA Intake Manifold Ring for Yamaha 1.8L naturally aspirated jetskis from 2008 and up Ref: RY12055-IMUK
Maptuner X Diagnostic Cable for Yamaha ref. 01-MT020
Yamaha cover storage bag ref. MWVWVRNRBG01
Riva Engine Breather for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS from 2012 and + ref. RY19040-12-EBUK
Black end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLK