Subcategories
EASY RIDER Carter Screw Kit for Seadoo All 4-stroke Models (1500cc, 1600cc, 1630cc and 1700cc) except Seadoo Spark Ref: RS-4265
EASY RIDER Titanium Valve Cup Kit for Seadoo 4-stroke watercraft all models. Ref: RS-4214
PRO SERIES version Hydroturf mat for Seadoo RXT 215 / RXT-X / RXT-X RS 260 / GTX 155 / WAKE PRO 215 / RXT 260 / RXT 260 RS watercraft Reference: PR885 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Set of 2 Reinforced Rear Engine Mounts EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4268
- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
Reinforced cylinder head studs from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4260A
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Oil Vapor Tank and RIVA Breather Kit for Seadoo RXP 215, RXT 215, RXP-X 255, RXT-X 255, GTX 4 tec, RXP-X 260 watercraft, all models of RXT & GTX unsuspended, RXP-X 300, RXT-X 300, GTX Ltd 300, RXT 230, GTX 155, GTR 230, GTR-X 230 Reference: RS19050-BCC-6
WORX Racing shovel scoop for seadoo watercraft from 2009 and above with an S3 hull ref. : WR235
Wideband air and fuel sensor module from PLX for Maptuner from RIVA Racing Reference: 897346002726
Riva Racing electronic throttle trigger for Seadoo jet-ski ref. : RS2406010
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref. : 01.5594.XX
AQUA SPORT PERFORMANCE Anodized Water Pump Cover for Seadoo 1500 watercraft ref. : SD-16007B (black) / SD-16007R (red)
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Ring set for 130mm Forged Piston for 1730cc engine from EASY RIDER for Seadoo Watercraft Sold individually and for the RS-3056 piston kit Reference: RS-3057
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 159mm Solas for seadoo 215 / 255 / 260 Ref: SRX-HS-159-02
Supports for 2 fuel cans for jet ski Reference: 52-4910
3M pre-glued Hydroturf mat for Seadoo RXT 260 and RXT-X 260 (10-16), Wake 215 (10-15), GTX 155 and 215 (12-15) watercraft (except S models) ref. HT885-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
READ IT . ENGINE ALIGNMENT TOOL. ASSEMBLE ALIGN PLATE BRACKET KIT. (sea-doo all model)
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
3M pre-glued Hydroturf mat for Seadoo RXT 260 IS & AS (09-16), GTX S 155 & 260 (12-16), GTX ltd IS (09-17) watercraft ref. HT882-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Seadoo GTX 155 Watercraft, GTX Ltd. 215, 230, 300, RXT 260, Wake Pro (16-17) ref. HT886 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Ring Kit for Forged Piston in 100mm (99.93mm) from EASY RIDER for Seadoo Watercraft Sold individually Ref: RS-3062
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
High engine gasket set from Gasket Technology for SeaDoo 4 Tec 1500cc watercraft all models
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343