No products
KAWASAKI
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
KAWASAKI
Subcategories
-
284,95€ Delivery within 2 to 10 daysV-FORCE 3 valve box for Kawasaki
V-FORCE 3 valve box for Kawasaki brand jet-ski Reference: 360353 and 360233
284,95€Delivery within 2 to 10 days -
218,95€ Delivery within 2 to 10 days
COVERCRAFT Kawasaki Transport Cover
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
218,95€Delivery within 2 to 10 days -
163,96€ 204,95€ -20% In stock
Idiartec Reinforced Column for Kawasaki
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
163,96€ 204,95€ -20%Reduced price!In stock -
159,95€ Delivery within 1 to 3 weeks
Mat for STX 160 / 160X / 160 LX
Hydroturf mat for Kawasaki STX 160 / STX 160X / STX 160LX jet ski from 2020 and up Ref. HT642 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Delivery within 1 to 3 weeks
Hydroturf mat for Kawasaki Ultra (22+)
Hydroturf mat for Kawasaki Ultra 310 X jet ski from 2022 and more Reference: HT621 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
159,95€Delivery within 1 to 3 weeks -
159,95€ Out of stock
IDIARTEC turbine cone for Kawasaki Ultra 310
Turbine cone machined from solid, from the IDIARTEC brand for Kawasaki jet skis, Ultra 310 model in Ø47 or Ø50 base Reference: NK-310
159,95€Out of stock -
154,95€ Out of stock
Shim between Original Plate & Column 15F
Spacer between Original Kawasaki STX 15F jetski plate and Idiartec column Reference: EK-50/15F
154,95€Out of stock -
152,95€ Delivery within 2 to 10 days
Exhaust outlet ultra 250/260/15F 08+
Riva Ultra250/260/STX12&15F Rear Exhaust Outlet ref. RK16090-EO
152,95€Delivery within 2 to 10 days -
150,95€ Delivery within 2 to 10 days
Pro-Series Head Gasket for Kawasaki
PRO-SERIES Reinforced Head Gasket from RIVA Racing for Kawasaki Ultra 250 / 260, STX 12F / STX 15F, STX 160 & SX-R 1500 jet ski Reference: RK10090-CHG
150,95€Delivery within 2 to 10 days -
149,95€ Delivery within 1 to 3 weeks
Jettrim side protection for SXR 800
Jettrim side protection for Kawasaki SXR 800 jet-ski ref. KSXR106
149,95€Delivery within 1 to 3 weeks -
139,95€ Delivery within 2 to 10 days
PROX piston kit for Kawasaki SXR 800 jet ski
PROX piston kit (piston + segments + pin + circlips) for Kawasaki SXR 800 jet-ski ref. 01.4523.X
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
TBM exhaust outlet for Kawasaki SXR800
Black anodized TBM exhaust outlet for Kawasaki SXR 800 jet ski ref. TBM110
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
WORX 2° Inclined Turbine Shim for Ultra
WORX Racing 2° Angled Turbine Shim for Kawasaki Ultra 300 and 310 Jet Skis Ref: WR05002
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
SOLAS scoop for Kawasaki SX/ SXI/ XIR
SOLAS shovel scoop for Kawasaki SX 750 (92-96) / SXI 750 (95-96) / XIR 750 (94) Ref: KE-IG-B
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
Compressor lubrication system
Compressor lubrication system for Kawasaki Ultra 250 / 260 Reference: IWCS-USU
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
NEKEN 28mm reinforced handlebar,...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
R&D 1° turbine spacer for Ultra 300, 310
R&D 1° Turbine Spacer for Kawasaki Ultra 300 / 310 ref. 141-30000
139,95€Delivery within 2 to 10 days -
134,95€ Out of stock
Double start/stop switch Idiartec (15-19)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Out of stock -
132,95€ 139,95€ -5% In stock
ODI Reinforced Universal Handlebar
ODI reinforced handlebar for saddle jet Reference: 06013082
132,95€ 139,95€ -5%Reduced price!In stock -
131,95€ Delivery within 2 to 10 days
RIVA MAPTUNERX cable for Ultra 300 / 310
RIVA MAPTUNERX cable for Kawasaki Ultra 300 / 310 ref. 01-MT018
131,95€Delivery within 2 to 10 days -
129,95€ Delivery within 1 to 3 weeks
Jettrim central mat for Kawasaki SXR 800
Jettrim central mat for Kawasaki SXR 800 hand jet ref. KSXR101-C
129,95€Delivery within 1 to 3 weeks -
129,95€ Delivery within 2 to 10 days
SOLAS scoop for Kawasaki Ultra 130/150
SOLAS bailer for Kawasaki jet skis, Ultra 130 & 150 model Reference: KH-IG-B
129,95€Delivery within 2 to 10 days -
127,46€ 149,95€ -15% In stock
Wössner Ultra 300 / 310 Forged Piston Kit
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 300 and 310 jet skis Reference: K6510DA
127,46€ 149,95€ -15%Reduced price!In stock -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Black and White Reinforced...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
123,45€ 129,95€ -5% In stock
Riva Racing handlebar with 'Pro-Bar' 0°...
Riva Racing 'Pro-Bar' 0° black handlebar with reinforcement bar for hand jet References: RY201BK-BAR-2
123,45€ 129,95€ -5%Reduced price!In stock -
119,95€ Out of stock
Idiartec double start/stop switch (20+)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
119,95€Out of stock -
119,95€ In stock
Hood attachment strap set for jet-ski
Bonnet attachment strap set ref. 920723812 / 920723815
119,95€In stock -
119,95€ Delivery within 2 to 10 days
Kawasaki aluminum tank cap
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
119,95€Delivery within 2 to 10 days -
117,95€ Delivery within 2 to 10 days
ADA Hood Hooks for SXR-800/1500
ADA Racing Hood Hooks for Kawasaki SXR-800 and SX-R 1500 Hand Jets Ref: 31-660200
117,95€Delivery within 2 to 10 days -
115,95€ Delivery within 2 to 10 days
Reinforced Engine Mount for STX / Ultra 4T
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
115,95€Delivery within 2 to 10 days -
113,95€ 119,95€ -5% In stock
Valve Stem Kit for Kawasaki Jet Ski
VALVE PAD KIT for Kawasaki 4-stroke 9.48mm from HOT CAMS Reference: HCSHIM02
113,95€ 119,95€ -5%Reduced price!In stock -
113,00€ 118,95€ -5% In stock
Kawasaki Waterproof Screw-in Switch
Kawasaki ON/OFF switch Under the stalk
113,00€ 118,95€ -5%Reduced price!In stock -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
RRP pad holder and steering stop
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
RACING VALVE BOYESEN FIBER KAWASAKI
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Delivery within 2 to 10 days -
107,96€ 119,95€ -10% In stock
Reverse lever deletion kit
Riva Racing brand reverse gear removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 jet skis References: RK5-U250X-RLB
107,96€ 119,95€ -10%Reduced price!In stock -
104,95€ Out of stock
Tensioner roller for Kawasaki Ultra 250/260
Reinforced aluminum belt tensioner roller with anti-corrosion treatment in Ø 75 with FAG 6203 bearing and stainless steel circlips (assembly already assembled) REF: GT-250/260
104,95€Out of stock -
104,95€ Out of stock
Tensioner pulley for Kawasaki Ultra 300/310
Reinforced aluminium belt tensioner pulley with anti-corrosion treatment in Ø 80/Ø85 with FAG 6203 bearing and stainless steel circlips (assembly already fitted) REF: GT-300/310
104,95€Out of stock -
99,95€ In stock
Step by Step R&D Manual for Kawasaki
Step by Step Manual from R&D for jet ski Kawasaki SXR 1500, STX 12F, STX 15F, Ultra LX 160, Ultra 250, Ultra 260 from 2005 to 2010 Ref: 611-81520
99,95€In stock -
99,95€ Delivery within 1 to 3 weeks
Hydroturf mat for Kawasaki 650 SX jet ski
Hydroturf mat for Kawasaki 650 SX jet ski ref. HT65 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
99,95€Delivery within 1 to 3 weeks -
99,95€ Delivery within 1 to 3 weeks
Hydroturf carpet for Kawasaki 550 SX jet ski
Hydroturf carpet for Kawasaki 550 SX jet ski ref. HT55 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
99,95€Delivery within 1 to 3 weeks -
99,95€ Delivery within 2 to 10 days
Blowsion Alu Exhaust Outlet for SXR...
Blowsion aluminum exhaust outlet for Kawasaki jet skis, SXR 800 and SXR 1500 models as well as Yamaha Superjet TR-1
99,95€Delivery within 2 to 10 days -
99,95€ Delivery within 2 to 10 days
Valve Shim Kit for Kawasaki
Valve Shim Kit for Kawasaki STX 12F (03-04), STX 15F (04-16), Ultra LX (07-16), Ultra 250 (07-08) and Ultra 260 (09-10) Ref: 29.VSA948
99,95€Delivery within 2 to 10 days -
98,96€ 109,95€ -10% In stock
Coupler extractor for jetski Ultra 150
WSM adaptable coupler extractor for Kawasaki Ultra 150 jet ski (sold individually) original ref.: 57001-1423 adaptable ref.: 003-310
98,96€ 109,95€ -10%Reduced price!In stock -
98,95€ Out of stock
Reinforced turbine shaft for Ultra 300 / 310
IDIARTEC reinforced turbine axle for Kawasaki Ultra 300 / 310 Jet-ski REF: ATK-300
98,95€Out of stock -
96,95€ Delivery within 2 to 10 days
Blowsion surround and hull protection
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
96,95€Delivery within 2 to 10 days -
95,95€ Delivery within 2 to 10 days
Riva Racing 'Pro-Bar' 4° Handlebar for Arm...
Riva Racing 'Pro-Bar' 4° handlebar for hand jet References: RY202BK-FAT
95,95€Delivery within 2 to 10 days -
94,95€ Out of stock
Compressor nose machined from solid for...
IDIARTEC billet compressor nose for Kawasaki Ultra 260 Jet-ski REF: NCK
94,95€Out of stock -
89,96€ 99,95€ -10% In stock
MAPTUNERX Cable for 1.8L (08-17)
RIVA MAPTUNERX cable for Yamaha 1800 from 2008 to 2017 ref. 01-MT017
89,96€ 99,95€ -10%Reduced price!In stock -
89,96€ 99,95€ -10% In stock
Seadoo intercooler flush fitting kit
Intercooler Flush Fitting Kit Ref: A7005
89,96€ 99,95€ -10%Reduced price!In stock -
84,96€ 99,95€ -15% In stock
Hydroturf Carpet for Kawasaki 750 SX / SXI
Hydroturf mat for Kawasaki 750 SX / SXI jet ski ref. HT67 All Hydroturf products are custom-made and individually manufactured. They require a minimum manufacturing time of 15 business days. They cannot be returned or exchanged.
84,96€ 99,95€ -15%Reduced price!In stock -
81,56€ 95,95€ -15% In stock
Riva Racing 'Pro-Bar' 0° handlebar for arm...
Riva Racing 'Pro-Bar' 0° handlebar for hand jet References: RY201BK-FAT
81,56€ 95,95€ -15%Reduced price!In stock -
39,98€ 99,95€ -60% In stock
Star Bar Booster Handlebar for Saddle Jet
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX
39,98€ 99,95€ -60%Reduced price!In stock
