Subcategories
RIVA fuel pressure test kit for Kawasaki and Yamaha 4-stroke engines Reference: RY12040-FPTK-100
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
Rear footrest 5.08cm ref. KICK02
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
BLOWSION Bilge Pump Bracket for Kawasaki SXR 1500 Jet Ski Ref: 06-01-104
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
Blowsion throttle cable flywheel for Kawasaki jet ski model SXR 800 Reference: 01-02-520
Softer Throttle Body Spring for Kawasaki 1500 Jet Ski Ref: DWSP-4
K&N air filter water protection sock (see table below)
Hydroturf lateral footrest to be glued on, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
POT HOSE 100MM X 52MM (4''X 2-1/16'') FACTORY PIPE Ref: COMHOS0100
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
RIVA Racing cover for RS13050 and RK13085 filter Reference: RS13050-PF-BLK
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
RIVA MaptunerX Diagnostic Cable for Kawasaki 4 Stroke Reference: 01-MT046
Brass insert from the IDIARTEC brand for Sponson Kawasaki STX 15F and Ultra 310 References: ILK-M6 & ILK-M8
Quick-release connector for garden hose Ref: SC-2900
Gasket kit for Kommander 1100/1200 cylinder head (with girdle) ref. KOM-110-O-RING
Tool for adjusting the compressor belt tension on a Kawasaki ULTRA 250 and 260 jet ski
3.5mm Male to Female HDMI Extension Cable for RIVA Racing Maptuner Reference: 01-MT019/2
Stainless steel towing ring for jet ski ref. QL-02
ADA Domed Cylinder Head O-Ring for KAWASAKI 800
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
Bostik Agosolvant thinner/solvent for neoprene, nitrile, PU, and acrylic carpet adhesives (Origine, Hydroturf, Jettrim, etc.)... Sold in 1L containers Reference: BOKM511310
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
ADA racing cylinder head gasket kit for Kawasaki Ultra 150 and STX-R ref. ORKITKU150
ADA Domed Cylinder Head O-Ring Kit for KAWASAKI 1100 Jet Ski Ref: ORKITK1100
Hot Products Bilge Pump Bracket for Kawasaki 550 SX / 650 SX / 750 SX-SXI ref. 57-3024
Reinforced hose for Factory Pipe exhaust by Blowsion, black color Reference: 01-01-703
Reinforced hose for Factory Pipe exhaust by Blowsion, blue color Reference: 01-01-702
Blowsion aluminum dashboard button for Kawasaki jet skis, models 750SXI and 800SXR Reference: 04-03-30X
Adaptable WSM Turbine Body Gasket for Kawasaki jet ski 750 to 1500 from 1995 to 2024 Reference: 003-551
COVER FOR TAU CETI ROUND AIR FILTER THICKNESS:1.5'' Ref: PF-TCP-01
Bearing and seal kit for RRP or RIVA Racing stand-up jet ski plates Reference: 03-05-069
WSM or SBT (depending on availability) air filter adapter for Mikuni 44 mm carburetor with oil injection Ref: 006-661-01
WSM or SBT (depending on availability) air filter adapter for Keihin 38 / 40 / 42 mm carburettor Ref: 006-665
Tau Ceti Air Filter Cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
WSM or SBT (depending on availability) air filter adapter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
Stainless steel towing ring for sit-down jet skis
POT HOSE 50MM X 63MM (2'' X 2-1/2'') FACTORY PIPE Ref: COMHOSO080
Bearing and seal kit for Blowsion Universal OVP deck for arm jet Reference: 03-05-092
26mm hood gasket (does not include 3M self-adhesive). for arm jet ref. TS56
Set of 4 anodized aluminum washers to replace the washers for fixing adjustable shim plates. Ref: 04-04-01X
Side foot wedge 33x5cm ref. TS43
Flushing kit from Atlantis for Kawasaki Ultra 150 jet ski from 1989 to 1991 Reference: A2520
Original carburetor high speed adjustment screw Gp800 / SD951 / SXR800 ref. SA-100
Rear footrest 2.54cm ref. KICK01
LOW RPM ADJUSTMENT SCREW FOR ORIGINAL CARB K 800 SXR Ref: SA-500
Aluminum Nose Bolt for Kawasaki ref. 57-62XX
3/8" (9.5mm) Water Circuit Filter for Factory Pipe Pot ref. COMFTG0036
Riva 2.38/3.25 exhaust hose ref. RK15-2.38/3.25
Reinforced base gasket from COMETIC for Kawasaki brand arm jet, model SXR 800 of different thicknesses (0.75mm, 1mm, 1.25mm, 1.5mm, 1.65mm) Reference: 7040
NEKEN Reinforced Handlebar Foam Pad for 24.5cm Tube ref. 0601288X Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green
Liquid neoprene adhesive for Hydroturf carpets. Sold in 125ml tubes or 1L tubs. References: BOKM502930 or BOKM502932
Kawasaki magnetic flywheel puller Kawasaki Fly Wheel Puller ref. 003-317 / 003-318
Factory pipe exhaust hose 63x63mm
1-inch (2.54cm) Hydroturf jet ski pad for Kawasaki 750 SX / SXI / 800 SXR stand-up jet skis Reference: TS401
NEKEN Square Reinforced Handlebar Foam ref. 0601XXX Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green Blue Red Black and Orange Black and Yellow Yellow and Black Green and Black Light Blue Fluorescent Orange and White Light Blue and White Red and White Carbon Black / Light Blue Carbon Black / Green Carbon black / Orange Carbon...