Idiartec Reinforced Column for Kawasaki

IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski

Reference: IDT-RK and IDT-RAK

COLUMN H 45

Aluminum column machined from mass and black anodized, Height 45mm, Bridges tightened with stainless steel screws, Handlebar tightening diameter 28.6 and diameter 22.2 with split reduction rings, Ø 28.6 x Ø 22.2.

COLUMN H 100

Aluminum column machined from mass and black anodized; height 100 mm, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with slotted reduction rings Ø 28.6 x Ø 22.2

COLUMN H 130 FIXED

Aluminum column machined from mass and black anodized; height 130 mm, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2

FIXED or CUSHIONED COLUMN H 160

Damped aluminum column entirely machined from the mass and color anodized. Damping by stainless steel spring, load 80 kg or 100 kg on request; easy replacement of the spring and seals by unscrewing 1 M12 nut. Lubrication of the mechanism with a manual pump and marine grease supplied with the column. Choice of mounting of handlebars without Ø 28.6 bar or Ø 22.2 handlebars with reinforcement bar in split aluminum rings Ø 28.6 x Ø 22.2.

FIXED or CUSHIONED COLUMN H 195

Damped aluminum column entirely machined from the mass and color anodized. Damping by stainless steel spring, load 80 kg or 100 kg on request; easy replacement of the spring and seals by unscrewing 1 M12 nut. Lubrication of the mechanism with a manual pump and marine grease supplied with the column. Choice of mounting of handlebars without Ø 28.6 bar or Ø 22.2 handlebars with reinforcement bar in split aluminum rings Ø 28.6 x Ø 22.2.

FIXED or CUSHIONED COLUMN H 230

Aluminum column machined from mass and black anodized; height 230mm, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2

COLUMN H 300

Aluminum column machined from solid and black anodized, height 300mm for mounting on original plate, clamps tightened with stainless steel screws, handlebar clamp diameter 28.6 and diameter 22.2 with split reduction rings Ø 28.6 x Ø 22.2