Subcategories
Hydroturf mat PRO SERIES version for Yamaha jet skis - VX 110 Sport from 2015 to 2020 - VX 110 Deluxe from 2015 to 2020 - VX110 Cruiser from 2015 to 2020 - VX Limited from 2015 to 2020 - VX HO from 2015 to 2020 - GP 1800 from 2017 to 2020 Reference: PRVX2 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing...
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Air filter kit from RIVA Racing for Yamaha jet ski: - GP 1800R HO (1.8L & 1.9L) from 2020 and more - FX HO (1.8L & 1.9L) from 2012 and up - VX HO (1.8L & 1.9L) from 2016 and more - VXR (1.8L) from 2012 to 2019 - VXS (1.8L) from 2012 to 2016 Reference: RY13062
Large Volume Fuel Pump Kit (340 L/H) RIVA Racing for Jetski Yamaha1800 Ref: RY12040-340FP-KIT
Wideband air and fuel sensor module from PLX for Maptuner from RIVA Racing Reference: 897346002726
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha GP1800 jet ski Reference: BGG-GP1800
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
IDIARTEC reinforced steering axle for Yamaha GP1800 and VXR / VXS jet skis from 2016 and up Reference: ADY-GP1800
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Box + electronic trigger on the right side (accelerator) from IDIARTEC for jet ski Yamaha VX HO, FX HO, FX SHO, FX SVHO? FZR SVHO, FZS SVHO and GP1800 Reference: BGD-SHO
Wiseco piston 86mm (8.6:1) for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Comes with segments, clips and axle.
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
Electronic trigger on the right side (accelerator) from IDIARTEC for Yamaha GP1800 jet ski Reference: GD-GP1800
Supports for 2 fuel cans for jet ski Reference: 52-4910
Pressure regulator box at 3 bar (29.7 PSI) from RIVA Racing for jet ski Yamaha SHO 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and more Ref: RY11740-MS-3
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO jet ski (18+) Ref: RY12080-IMUK
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for Yamaha VX110 Sport (15-20) / VX110 Deluxe (15-20) / VX110 Cruiser (15-20) / VX Limited (15-20) / VX HO (15-20) and GP1800 (17-) jet ski 20) ref. HTVX2 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2020 and above Reference: RY1013-WS-82
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Handlebar bag for Yamaha jetski from 2019 and up Reference: MWV-HPACK-00-00
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
Yamaha 1.8 Compressed Freewheel Retaining Tool for Bearing Removal Ref: RY17040-SCT
Maptuner X Programming Cable for TR-1 / GP 1800 (18+) ref. 01-MT023
High volume single fuel pump from RIVA Racing for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
IDIARTEC start and stop switch Ref: CSS
Adapter for (Dump Valve, Pressure Regulator, etc.) on the intake manifold of Yamaha 1800 jet skis (SHO / SVHO) from RIVA Racing Reference: RY12110-VPA
Retractable cleats for Yamaha jet skis References: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski all models. Reference: RY19040-KS
Reinforced Intake Valve +1mm RIVA RACING for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-1
RIVA RACING Reinforced Intake Valve (original side) for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-0
Remote control for Yamaha EcoXgear audio system References: F3X-G8280-V0-00
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
Handle extension kit from RIVA Racing for Yamaha jet skis from 2015 and more Reference: RY24061-BES-3
Red and blue anodized oil cap from RIVA Racing for Yamaha 1.8 jet ski all models. Reference: RY19040-OC
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
RIVA Racing cover plate for the original Yamaha Ride throttle body of your jet ski Reference: RY24110-SC
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tube or 1L pot References: BOKM502930 or BOKM502932
Trim extension from WORX Racing for Yamaha jet-ski equipped with the “Ride” Reference: WR06021
Yamaha cover storage bag ref. MWVWVRNRBG01
Riva Engine Breather for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS from 2012 and + ref. RY19040-12-EBUK
H2O Protection for Air Filter RY13100, RY13110, RK13090, RK13100 and RK13090-2 Ref: RK13090PF-BK
Tial Wastegate Valve Blocking Kit from RIVA racing Reference: RY17040-BVBO-TV