Subcategories
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha GP1800 jet ski Reference: BGG-GP1800
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
IDIARTEC reinforced steering axle for Yamaha GP1800 and VXR / VXS jet-skis from 2016 and up Reference: ADY-GP1800
Wideband air and fuel sensor module from PLX for Maptuner from RIVA Racing Reference: 897346002726
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Box + right side electronic trigger (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO jet ski? FZR SVHO, FZS SVHO and GP1800 Reference: BGD-SHO
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
Electronic trigger on the right side (accelerator) from IDIARTEC for Yamaha GP1800 jet ski Reference: GD-GP1800
Supports for 2 fuel cans for jet ski Reference: 52-4910
Pressure regulator box at 3 bar (29.7 PSI) from RIVA Racing for jet ski Yamaha SHO 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and more Ref: RY11740-MS-3
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for Yamaha VX110 Sport (15-20) / VX110 Deluxe (15-20) / VX110 Cruiser (15-20) / VX Limited (15-20) / VX HO (15-20) and GP1800 (17-) jet ski 20) ref. HTVX2 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2020 and above Reference: RY1013-WS-82
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Handlebar bag for Yamaha jetski from 2019 and up Reference: MWV-HPACK-00-00
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
High volume single fuel pump from RIVA Racing for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
IDIARTEC start and stop switch Ref: CSS
Maptuner X Programming Cable for TR-1 / GP 1800 (18+) ref. 01-MT023
Retractable cleats for Yamaha jet-ski References: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski all models. Reference: RY19040-KS
Reinforced Intake Valve +1mm RIVA RACING for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-1
RIVA RACING Reinforced Intake Valve (original side) for Yamaha Jet-ski 1.8L after 2014 ref. RY19040-IVS-0
Remote control for Yamaha EcoXgear audio system References: F3X-G8280-V0-00
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
Red and blue anodized oil cap from RIVA Racing for Yamaha 1.8 jet ski all models. Reference: RY19040-OC
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
Riva engine breather for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS from 2012 and up ref. RY19040-12-EBUK
Handle extension kit from RIVA Racing for Yamaha jet skis from 2015 and more Reference: RY24061-BES-3
RIVA Racing cover plate for the original Yamaha Ride throttle body of your jet ski Reference: RY24110-SC
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
RIVA intake manifold ring for Yamaha 1.8L atmospheric jetski from 2008 and up Ref: RY12055-IMUK
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Trim extension from WORX Racing for Yamaha jet-ski equipped with the “Ride” Reference: WR06021
Yamaha cover storage bag ref. MWVWVRNRBG01
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
H2O Protection for Air Filter RY13100, RY13110, RK13090, RK13100 and RK13090-2 Ref: RK13090PF-BK
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
Maptuner X Diagnostic Cable for Yamaha ref. 01-MT020
1/2" Connector for Water Hose Ref: RY1013-TH-1/2
3.5mm Male/Female HDMI extension cable for Maptuner from RIVA Racing Reference: 01-MT019/2
Removes the Original Fuel Regulator in order to mount a Racing Regulator on Yamaha 1800 jet ski all models Ref. : YH-16101
Empty ball hold from BNJ for Yamaha jet ski all models Reference: BNJDRAIN