Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke 1800cc jet-skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Box + right side electronic trigger (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO jet ski? FZR SVHO, FZS SVHO and GP1800 Reference: BGD-SHO
WSM adaptable compressor bearing for Yamaha 1800 FX SHO (11-13) / FZR (11-13) / FZS (11-13) jet-ski ref. 010-131
Worx cooling kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the No. 2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1,2 or 3 fittings to...
Anti-Cavitation Turbine Cone from WORX Racing for Yamaha SHO jet-ski Ref: WR06008
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
Pressure regulator unit at 3 bar (29.7 PSI) from RIVA Racing for Yamaha SHO and FZR / FZS jet ski from 2008 to 2010 Ref: RY11740-MS-3
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
Supports for 2 fuel cans for jet ski Reference: 52-4910
Riva Racing brand air filter in original format for Yamaha jet ski HO / SHO / SVHO / FZR / FZS / FZR SVHO / FZS SVHO / VXR / VXS References: RY13040-OE-1
Pressure regulator box at 3 bar (29.7 PSI) from RIVA Racing for jet ski Yamaha SHO 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and more Ref: RY11740-MS-3
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
RecDeck Cooler Bags for Jetski Yamaha FX References: F3X-F48A0-V0-00
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Hydroturf mat for jet ski Yamaha SHO and SHO Cruiser from (12-16) / FX HO, HO Cruiser, SVHO and SVHO Cruiser from (12-18) Reference: HTFX2 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
IDIARTEC reinforced engine mount for Sea-Doo RXT / RXP 260 Ref: IDT-SMRXT
WSM air filter (assembly to replace the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for Yamaha FX HO, HO Cruiser, SVHO and SVHO Cruiser jet skis from 2019 and up ref. HTFX3 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Anti-cavitation kit for Worx WR232 scoop for Yamaha FX HO and SHO jet-ski from 2008 to 2011 Ref: WR0702
Anti-Cavitation Kit from WORX RACING for Ecope Worx WR237 for Yamaha FX HO, SHO and SVHO jet-ski from 2012 to 2014 Ref: WR0703
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Storage under hood for Yamaha jetski References: F5G-U511A-V0-00
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
Yamaha 1.8 Compressed Freewheel Retainer Tool for bearing removal Ref: RY17040-SCT
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Original workshop manual in paper format for Yamaha brand jet ski, FX HO, SHO, Cruiser model from 2015 to 2018 Reference: LIT-18616-FX-15
Side wedge for Yamaha 1.8L ref. RY10040-TB-OIB125
Water filter for pump from RIVA Racing for Yamaha jet ski, model: - FX 140 from 2004 to 2006 - FX 160 from 2005 to 2008 - FX HO from 2008 to 20019 - FX SHO from 2008 to 2019 Reference: RY1013-WS-40
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Riva reinforced liner for Yamaha 1.8L Ref: RY10040-SLV-615
Riva anti cavitation kit for Yamaha HO / SHO / SVHO (2012 and +) with scoop Riva RY22070 Ref: RY25070 This kit allows to plug this mega'tron on the scoop and the water inlet.
Original workshop manual in paper format for Yamaha brand jet ski, FX SHO model, Cruiser SHO from 2008 to 2011 Reference: LIT-18616-03-16
Original workshop manual in paper format for Yamaha brand jetski, FX HO model from 2012 to 2018 & FX SHO from 2012 to 2016 Reference: LIT-18616-03-41
High volume single fuel pump from RIVA Racing for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP