Subcategories
Propellers for all Kawasaki jet skis: KG-CD-13/19, KG-CD-14/20, KG-CD-14/21, KG-CD-15/21, KR-CD-14/21, KR- CD-15/22, KX-CD-10/16, KX-CD-16/21, KX-CD-15/23, KX-CD-16/24, KG-CD-16/22, KGX-CD- 15/20, KGX-CD-12/16, KG-CD-11/17, KG-CD-12/18 (see the correspondence table at the bottom of the page)
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
Reinforced compressor pulley + IDIARTEC bearing for Kawasaki Ultra 250 and 260 jet-ski REF: PU-250/260
Riva Ultra250/260/STX12&15F Rear Exhaust Outlet ref. RK16090-EO
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
Supports for 2 fuel cans for jet ski Reference: 52-4910
Sided coupler IDIARTEC reinforced motor for Kawasaki Ultra 250/260 jet-ski REF: CMK-260
IDIARTEC reinforced transmission coupler for Kawasaki Ultra 250/260 jet-ski REF: CDK-260
PROX piston kit (piston + segments + pin + circlips) for Kawasaki Ultra 260 jet ski ref. 01.4559.A ref. 01.4559.B ref. 01.4559.C
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Kawasaki Ultra jet ski - Ultra LX 160 until 2022 - 250X & 250LX - 260X & 260LX - 300X & 300LX - 310 X & 310 LX until 2021 Reference: HT62 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
TBM hull reinforcement for jet ski Kawasaki 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
Riva mirror removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 Ref: RK5-U250X-MB
PRO-SERIES Reinforced Head Gasket from RIVA Racing for Kawasaki Ultra 250 / 260, STX 12F / STX 15F, STX 160 & SX-R 1500 jet ski Reference: RK10090-CHG
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 250 and 260 jet-ski Ref. : KPWKU250/260
Speed Magic Exhaust Cyclone for Kawasaki Ultra 250/260/300/310 ref. : SE-098066
RIVA DISCHARGE FILTER KIT FOR KAWASAKI ULTRA 250/260 Ref: RK1750-BPUK
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Kawasaki ON/OFF switch Under the comodo
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
VALVE PAPEL KIT for Kawasaki 4-stroke 9.48mm from HOT CAMS Reference: HCSHIM02
COMETIC Reinforced Head Gasket for Kawasaki Available in 84 or 85mm Ref. C6222-84 or C6222-85
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Valve Shim Kit for Kawasaki STX 12F (03-04), STX 15F (04-16), Ultra LX (07-16), Ultra 250 (07-08) and Ultra 260 (09-10) Ref: 29.VSA948
Step by Step Manual from R&D for jet ski Kawasaki SXR 1500, STX 12F, STX 15F, Ultra LX 160, Ultra 250, Ultra 260 from 2005 to 2010 Ref: 611-81520
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Riva Racing brand reverse gear removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 jet-ski References: RK5-U250X-RLB
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Reinforced aluminum belt tensioner roller with anti-corrosion treatment in Ø 75 with FAG 6203 bearing and stainless steel circlips (assembly already assembled) REF: GT-250/260
Compressor lubrication system for Kawasaki Ultra 250 / 260 Reference: IWCS-USU
IDIARTEC start and stop switch Ref: CSS
Compressor nose cut from IDIARTEC mass for Jet-ski Kawasaki Ultra 260 REF: NCK
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
WSM adaptable coupler extractor for kawasaki Ultra 150 jet-ski (sold individually) ref. origin: 57001-1423 ref. adaptable: 003-310
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Hand Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Universal wheel puller for 2-stroke jet ski References: 003-322 / 80-104
Riva air filter only for RK13090 and RK13100 kit Ref: RK13090-2
Universal bridge kit from 22 to 28mm for Yamaha, Kawasaki, Seadoo jet skis and many others... Reference : RR20031901: 20mm RR20031902: 30mm RR20031902: 50mm
Column wedge for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Atlantis flushing kit for Kawasaki 4-stroke jet ski Reference: A2628
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Wastegate removal plate from RIVA Racing for Kawasaki Ultra 160LX / 250 / 260 / 300 / 310 jetski Reference: RK17090-WBO
Handlebar with NEKEN reinforcement bar for saddle jet ref. 060129XX
PWC Lube oil for Kawasaki Ultra 250, 260, 300 and 310 jet ski compressor in 250ml Ref. : PWC001019
VersiPlug ball bilge drain for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows you to empty the hold during navigation and prevent water from entering when the jet ski remains static, using water pressure. Sold individually.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
Duckbill and mounting kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX