Subcategories
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2015 to 2019 Ref: CDS-15/19
VALVE SHAKE KIT for Kawasaki 4-stroke 9.48mm engines from HOT CAMS Reference: HCSHIM02
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
ODI reinforced handlebars for sit-down jet skis Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Kawasaki ON/OFF switch Under the stalk
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Riva Racing brand reverse gear removal kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 jet skis References: RK5-U250X-RLB
ADA Racing Hood Hooks for Kawasaki SXR-800 and SX-R 1500 Hand Jets Ref: 31-660200
Reinforced Engine Mount from RHAAS Products for KAWASAKI STX 12F / 15F and Ultra 160 LX / 250 / 260 / 300 / 310 jet skis Ref: STXMOUNT4ST
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Idiartec dual switch (start & stop) for Seadoo personal watercraft from 2020 onwards Reference: CDS-20
Valve Shim Kit for Kawasaki STX 12F (03-04), STX 15F (04-16), Ultra LX (07-16), Ultra 250 (07-08) and Ultra 260 (09-10) Ref: 29.VSA948
IDIARTEC start and stop switch Ref: CSS
Step-by-Step Manual from R&D for Kawasaki SXR 1500, STX 12F, STX 15F, Ultra LX 160, Ultra 250, Ultra 260 jet skis from 2005 to 2010 Ref: 611-81520
Steering column shim for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Universal wheel puller for 2-stroke jet skis References: 003-322 / 80-104
Set of hood fastening straps ref. 920723812 / 920723815
Universal 22-28mm riser kit for Yamaha, Kawasaki, Seadoo jet skis and many others... Reference : RR20031901: 20mm RR20031902: 30mm RR20031902: 50mm
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Tie-down kit for luggage on Kawasaki Ultra 160 & 310 jet skis from 2022 and up References: 99994-1717
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
RIVA Racing Wastegate Delete Plate for Kawasaki Ultra 160LX / 250 / 260 / 300 / 310 Jet Skis Reference: RK17090-WBO
Speed sensor lock for TBM hull plate " TBM123-UL3 " on Kawasaki Ultra 250 / 260 / 300 / 310 jet ski Reference: TBM1236
Duckbill and bracket kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
VersiPlug ball-type bilge pump for all Kawasaki models, available in aluminum or black ref. PD1301, PD1300 A plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains stationary, using water pressure. Sold individually.
NEKEN handlebar with reinforcement bar for sit-down jet ski ref. 060129XX
Blue colored end caps and clamps from the RIVA brand for ODI handles Reference: RY206-BLU
Red end caps and clamps from the RIVA brand for ODI handles Reference: RY206-RED
3M neoprene spray glue 500ml ref. C3MNEOSPR500ML
Softer Throttle Body Spring for Kawasaki 1500 Jet Ski Ref: DWSP-4
Hydroturf lateral footrest to be glued on, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Black end caps and clamps from RIVA for ODI handles Reference: RY206-BLK
RIVA MaptunerX Diagnostic Cable for Kawasaki 4 Stroke Reference: 01-MT046
RIVA Racing cover for RS13050 and RK13085 filter Reference: RS13050-PF-BLK
Instant disassembly connection for garden hose Ref: SC-2900
Bostik Agosolvant thinner/solvent for neoprene, nitrile, PU, and acrylic carpet adhesives (Origine, Hydroturf, Jettrim, etc.)... Sold in 1L containers Reference: BOKM511310
Stainless steel towing ring for sit-down jet skis
Side foot wedge 33x5cm ref. TS43
Propeller removal tool compatible with WSM or SBT (depending on availability) for original propellers of Yamaha, Kawasaki, Seadoo, Polaris, and Tigershark jet skis.
Liquid neoprene adhesive for Hydroturf carpets. Sold in 125ml tubes or 1L tubs. References: BOKM502930 or BOKM502932
NEKEN Reinforced Handlebar Foam Pad for 24.5cm Tube ref. 0601288X Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green
SOLAS propeller removal tool for Kawasaki jet skis Reference: WR001, WR002 and WR005
NEKEN Square Reinforced Handlebar Foam ref. 0601XXX Color : Fluorescent Yellow White Fluorescent Orange Black Fluorescent Green Blue Red Black and Orange Black and Yellow Yellow and Black Green and Black Light Blue Fluorescent Orange and White Light Blue and White Red and White Carbon Black / Light Blue Carbon Black / Green Carbon black / Orange Carbon...
Set of 6 A1 stainless steel knurled nuts for Kawasaki jet skis, Ultra model from 2022 and newer: - Ultra 160 LX - Ultra 160 LX-S - Ultra 310 X - Ultra 310 LX - Ultra 310 LX-S Reference: RR24070301
SOLAS propeller tip for Kawasaki jet ski
Hydroturf Carpet Sample ref. EHYDRO