Subcategories
Magnum pump SOLAS in 12 veins for Kawasaki SXR 1500, STX 900, 1100, 12F, 15F and ZXI 1100 jet ski Ref .: KGX-HSV-148/74
Skat Track Propeller for Kawasaki STX 12F (04-08) / 15F (04-16+) Ref: SK1100SW1319R 148mm Type: 1100/1200 Version: Swirl Gear ratio: 13/19R ** Maximum top speed Engine: Stock
IDIARTEC reinforced plate for Kawasaki STX 1100 / 1200 / 12F / 15F jet-ski Reference: PK-15F
Sponsons Worx STX1100/ 03 STX12F/04 STX15F ref; WR527
Sponsons Worx STX12 R ref. WR525
Grid kit for Kommander 1100/1200 cylinder head (with girdle) ref. KOM-110-HARDWARE
Kommander cylinder head for Kawasaki 1100 / 1200 (with girdle kit + gasket + water outlet elbow) ref. KOM-110-GZXI
Hydroturf mat PRO SERIES version for Kawasaki jet skis - STX 12F from 2001 to 2004 - STX 15F from 2005 to 2019 - STX 1100 from 2000 to 2003 - STX 1200 from 2000 to 2003 Reference: PR64 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Propellers for all Kawasaki 2-stroke 900cc jet-skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 800cc jet-skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1100cc jet-skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
SHOVEL BEAKER WORX KAWA STX/STXR/STX-F Ref: WR219
Propellers for all Kawasaki 2-stroke 1200cc jet-skis: the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
V-FORCE 3 valve box for Kawasaki brand jet-ski Reference: 360353 and 360233
Hydroturf seat cover for Kawasaki jet ski: - 1200 STX-R from 2002 to 2005 - STX-12F / 15F from 2003 to 2005 - 900 STX from 2006 Reference: SEW64R
Supports for 3 jet ski fuel cans Reference: 52-4911
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
1100SXR Exhaust Manifold ref. KOM-130-ZXI
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
TBM hull reinforcement for jet ski Kawasaki 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
IDIARTEC Reinforced Column for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310, STX 12F / 15F, STX 1100 / 1200, STX 160, STX-R, X2, Fixed or Damped jet ski Reference: IDT-RK and IDT-RAK
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Kawasaki STX 12F / STX 15F/ STX 1100 / STX 1200 jet ski from 2000 to 2019 ref. HT64 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Kawasaki ON/OFF switch Under the comodo
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Bonnet attachment strap set ref. 920723812 / 920723815
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
IDIARTEC reinforced steering axle for Kawasaki STX 12F, 15F, STX12R, 1100STX jet-ski REF: ADK-15F
IDIARTEC start and stop switch Ref: CSS
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
Column wedge for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Handlebar with NEKEN reinforcement bar for saddle jet ref. 060129XX
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
PROK air filter for 1 jet ski carburetor ref. 006-585
Flywheel puller for Kawasaki Ultra 150 ref. 003-318-01
Domes for 82mm and 85mm Kommander cylinder heads in 24cc to 34cc ref. KOM-822400-ZXI (82mm/24cc)ref. KOM-822600-ZXI (82mm/26cc)ref. KOM-822800-ZXI (82mm/28cc)ref. KOM-823000-ZXI (82mm/30cc)ref. KOM-823200-ZXI (82mm/32cc)ref. KOM-852400-ZXI (85mm/24cc)ref. KOM-85 2600-ZXI (85mm /26cc)ref. KOM-85 2800-ZXI (85mm /28cc)ref. KOM-8530 00-ZXI (85mm /30cc)
Duckbill and mounting kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
Universal bridge kit from 22 to 28mm for Yamaha, Kawasaki, Seadoo jet skis and many others... Reference : RR20031901: 20mm RR20031902: 30mm RR20031902: 50mm
Star Bar Booster handlebar for saddle jet ref. SB-BOOSTXL-XXX