Subcategories
MAPTUNERX DATA LOG APPLICATION Ref. : RY11UNI-LOG
Hydroturf saddle cover, HT premier model for Yamaha FZR jet ski from 2009 to 2011 Reference: AZ-SEWFZR
Hydroturf saddle cover, HT premier model for Yamaha jet ski FZS Reference: AZ-SEWFZS
Hydroturf seat cover for Yamaha FZR jet ski from 2012 and up Reference: SEWFZR1
Tialsport Q-series blow-off valve kit from RIVA Racing in 50mm / 8 PSI for Yamaha and Seadoo jet skis equipped with a compressor. Reference: 002588
RIVA free exhaust for Yamaha FX SHO from 2008-11/ FZR / FZS / FZ SVHO ref. RY16040
Solas by RIVA propeller for Yamaha 1800 (HO / SHO / VXR / VXS / FZR / FZS) from 2009 to 2016 Reference: YS-DF-13/22R Solas propeller in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. This propeller will allow you to exploit the power of your engine. Optimized for the best performance at mid and...
Riva valve lift tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
Large Volume Fuel Pump Kit (340 L/H) RIVA Racing for Jetski Yamaha1800 Ref: RY12040-340FP-KIT
Propellers for all Yamaha 4-stroke 1800cc jet-skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Hydroturf seat cover for Yamaha jet ski FZS 2009 and above Reference: SEWFZS
Hydroturf seat cover for Yamaha FZR jet ski from 2009 to 2011 Reference: SEWFZR
Compressor Rebuild Kit from WORX Racing for Yamaha 1800 Compressed jet ski (SHO, FZR, FZS, SVHO) Ref: WR04051
WORX shovel scoop for Yamaha FZR / FZS (09-13) ref. WR233
Hydroturf mat PRO SERIES version for Yamaha jet skis - FZR & FZS from 2008 to 2016 - FX SHO & SHO Cruiser from 2008 to 2011 - FX HO & HO Cruiser from 2008 to 2011 Reference: PRFX1 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Air filter kit from RIVA Racing for Yamaha jet ski: - GP 1800R HO (1.8L & 1.9L) from 2020 and more - FX HO (1.8L & 1.9L) from 2012 and up - VX HO (1.8L & 1.9L) from 2016 and more - VXR (1.8L) from 2012 to 2019 - VXS (1.8L) from 2012 to 2016 Reference: RY13062
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Riva hull plate for Yamaha FZR / FZS Ref: RY21050
Original cooling engine kit with intercooler for Yamaha FX-SHO/FZR/FZS 2011 +. Ref: RY10040-ECUK-I-11 Improves and streamlines the engine performance. This piece cannot adapt with ref. RY1704-ICUK
Universal discharge valve for jet ski, from the HKS brand, model Super SQV4 Reference: 71008-AK001
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
Professional lifting tool for arm jet and jet ski 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 3 jet ski fuel cans Reference: 52-4911
Main casing screw kit for Yamaha 1.8L Ref: RY10840-CMSK-1LB
Pressure regulator kit from the RIVA RACING brand in 24.9psi for jet ski from Yamaha model SHO and SVHO from 2011 and more Reference: RY11740-MS-4
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Jettrim mat 3 pieces for Yamaha FZR/ FZS jet ski ref. KYFZS103
Reinforced cylinder head gasket 86mm Riva for Yamaha 1.8L Ref: RY10040-CHG-86
HEAD GASKET 87 MM FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
EXHAUST OUTPUT ONLY FOR KIT RY15050 RIVA YAMAHA FX SHO/FZR/FZS Ref: RY15050-ET
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
WSM adaptable compressor bearing for Yamaha 1800 FX SHO (11-13) / FZR (11-13) / FZS (11-13) jet-ski ref. 010-131
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Worx cooling kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the No. 2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1,2 or 3 fittings to...
Wiseco piston 86mm (8.6:1) for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Comes with segments, clips and axle.
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
Pressure regulator unit at 3 bar (29.7 PSI) from RIVA Racing for Yamaha SHO and FZR / FZS jet ski from 2008 to 2010 Ref: RY11740-MS-3
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
Supports for 2 fuel cans for jet ski Reference: 52-4910
Riva Racing brand air filter in original format for Yamaha jet ski HO / SHO / SVHO / FZR / FZS / FZR SVHO / FZS SVHO / VXR / VXS References: RY13040-OE-1
Pressure regulator box at 3 bar (29.7 PSI) from RIVA Racing for jet ski Yamaha SHO 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and more Ref: RY11740-MS-3
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
WSM air filter (assembly to replace the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for Yamaha FZR / FZS jet ski from 2008 to 2016 and FX HO, FX HO Cruiser, FX SHO and FX SHO Cruiser from 2008 to 2011 Reference: HTFX1 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
WORX anti-cavitation kit for for FZR / FZS (09-13) ref. WR0701
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Side wedge for Yamaha 1.8L ref. RY10040-TB-OIB125
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
ODI reinforced handlebar for saddle jet Reference: 06013082
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688