Subcategories
RIVA RACING Engine Cooling Upgrade Kit for Yamaha SVHO Jet Ski Ref: RY10041-ECUK-PC-2
RIVA Cylinder Head Stud Kit for Yamaha SHO / FZR / FZS Ref: RY10040-HSK
RIVA Racing air filter kit for Yamaha jet ski: - GP 1800R HO (1.8L & 1.9L) from 2020 and up - FX HO (1.8L & 1.9L) from 2012 and up - VX HO (1.8L & 1.9L) from 2016 and up - VXR (1.8L) from 2012 to 2019 - VXS (1.8L) from 2012 to 2016 Reference: RY13062
WSM adaptable compressor bearing kit for Yamaha 1800 jet skis from 2011 to 2021 Reference: 010-131K
RIVA Racing High Volume Fuel Pump Kit (340 L/H) for Yamaha1800 Jetski Ref: RY12040-340FP-KIT
Riva Valve Lifter Tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
High Flow Injection Rail from RIVA Racing for Yamaha 1800 jet ski all models Reference: RY12040-BFR
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Hydroturf carpet PRO SERIES version for Yamaha jet ski - FZR & FZS from 2008 to 2016 - FX SHO & SHO Cruiser from 2008 to 2011 - FX HO & HO Cruiser from 2008 to 2011 Reference: PRFX1 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
Hydroturf Seat Cover for Yamaha Jet Ski FZS 2009 and + Reference: SEWFZS
Hydroturf seat cover, HT premier model for Yamaha jet ski FZS Reference: AZ-SEWFZS
Universal jet ski dump valve, from HKS, model Super SQV4 Reference: 71008-AK001
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
RIVA Free Exhaust for Yamaha FX SHO 2008-11 / FZR / FZS / FZ SVHO ref. RY16040
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
Jettrim mat 3 pieces for Yamaha FZR/ FZS jet ski ref. KYFZS103
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
EXHAUST OUTLET ONLY FOR KIT RY15050 RIVA YAMAHA FX SHO/FZR/FZS Ref: RY15050-ET
Housing + electronic trigger right side (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO? FZR SVHO, FZS SVHO and GP1800 jet ski Reference: BGD-SHO
Adaptable compressor bearing from WSM for Yamaha 1800 jet skis from 2011 to 2021 Reference: 010-131
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Supports for 2 fuel cans for jet ski Reference: 52-4910
WORX Racing Anti-Cavitation Turbine Cone for Yamaha SVHO Jet Skis Ref: WR06019
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
3 bar (29.7 PSI) pressure regulator housing from RIVA Racing for Yamaha SHO jet skis 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and + Ref: RY11740-MS-3
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
High performance air filter from Riva Racing in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
Hydroturf mat for Yamaha FZR / FZS jet skis from 2008 to 2016 and FX HO, FX HO Cruiser, FX SHO and FX SHO Cruiser from 2008 to 2011 Reference: HTFX1 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM Air Filter (Replacement for OEM) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082