Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Propellers for all Yamaha 4-stroke 1800cc jet-skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Reinforced Column from the IDIARTEC brand for Jet ski from the Yamaha brand VXR models References: CYVXR-XXX
Worx cooling kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the No. 2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1,2 or 3 fittings to...
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO jet ski (18+) Ref: RY12080-IMUK
Engine Breather Kit from RIVA Racing for Yamaha 1800 jet ski from 2012 and above Reference: RY19040-BCC
IDIARTEC reinforced steering axle for Yamaha VXR / VXS jet-ski before 2015 Reference: ADY-VXR
Riva Racing brand air filter in original format for Yamaha jet ski HO / SHO / SVHO / FZR / FZS / FZR SVHO / FZS SVHO / VXR / VXS References: RY13040-OE-1
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
WSM air filter (assembly to replace the original) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Hydroturf mat for jet ski Yamaha VX110 (10-14) / VX110 Sport (10-14) / VX110 Deluxe (10-14) / VX110 Cruiser (10-14), VXR / VXS (10-14) and V1 (15- 16) ref. HTVX1 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Anti-spray bib in 60 inches or 152cm from Hydroturf for jet-ski Reference: TS03
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
VALVE TABLETS KIT for 7.48mm Yamaha 4-stroke jet ski from HOT CAMS Reference: HCSHIM01
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Side wedge for Yamaha 1.8L ref. RY10040-TB-OIB125
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Riva reinforced liner for Yamaha 1.8L Ref: RY10040-SLV-615
Mirror removal cover for YAMAHA VXR/VXS/VX ref. RY5-VXR-MB
High volume single fuel pump from RIVA Racing for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
IDIARTEC start and stop switch Ref: CSS
Riva valve seal kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Retractable cleats for Yamaha jet-ski References: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski all models. Reference: RY19040-KS
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Red and blue anodized oil cap from RIVA Racing for Yamaha 1.8 jet ski all models. Reference: RY19040-OC
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
Riva engine breather for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS from 2012 and up ref. RY19040-12-EBUK
RIVA intake manifold ring for Yamaha jetski HO (13-15), SHO (08-15), FZR / FZS (09-15), VXR / VXS (13-15) Ref: RY12040-IMUK
RIVA intake manifold ring for Yamaha 1.8L atmospheric jetski from 2008 and up Ref: RY12055-IMUK
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Duckbill for Yamaha all models Ref: RY8100 Quick fit drains in the location of the original drain plugs. One-way non-return valve . Not recommended for use with a jetski stored in water permanently.
Yamaha cover storage bag ref. MWVWVRNRBG01
Riva engine breather for YAMAHA 1.8L from 2008 to 2011 ref. RY19040-EBUK-1
3M neoprene glue in spray 500ml ref. C3MNEOSPR500ML
High strength bolt kit directly replaces stock steering wheel bolts Ref: RY10840-FWB
Thinner, remover Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpet, Hydroturf, Jettrim... Sold in 1L pot Reference: BOKM511310
Maptuner X Diagnostic Cable for Yamaha ref. 01-MT020
1/2" Connector for Water Hose Ref: RY1013-TH-1/2
Stainless steel towing ring for saddle jet ski
Removes the Original Fuel Regulator in order to mount a Racing Regulator on Yamaha 1800 jet ski all models Ref. : YH-16101
Thermostat removal kit Ref: RY1013-40-TR
Empty ball hold from BNJ for Yamaha jet ski all models Reference: BNJDRAIN
PAD (Protective Foam) for Handlebars with RIVA Racing Reinforcement Ref: PAD01-235